Table of Contents
What Is the Standard Shower Head Height? Let’s tackle the most important question right away by pinpointing the standard height for a shower head. According to Hunker, the industry standard for how high a shower head should be is 80 inches.
Where should a shower head be placed?
The showerhead should be placed so it directs water toward the body, not the face or hair. A fixed showerhead, roughed in at 72 inches to 78 inches off the floor, is typical in many showers and tub/shower combinations.
What should be the height of shower head?
Many experts will tell you that the standard shower head height should be 80 inches above the floor of the bath. Although this dimension is ideal for most people, a shower head with a long neck can reduce this measurement by some inches. Some are 96 inches high while others fall to 72 inches.
How high should a rain shower head be from the floor?
Wall Or Ceiling Installation When installing, most rainshower heads are installed a little higher than standard showerheads at 80 inches to 84 inches from the shower floor. However, installing the rainshower head about 84 inches from the shower floor is recommended to accommodate taller users.
How far from side wall should shower head be?
Typically, a wall-mounted or fixed shower head should be about 3 to 4 inches from the wall. If you angle the shower arm at 100 or 120 degrees, you’d have enough space to move around your bathing enclosure without bumping against the wall.
What do I do if my shower head is too high?
If your shower head is too tall, get an extendable shower arm. You don’t have to do any in-the-wall plumbing to lower your shower head. An extendable shower arm allows you to lower your shower head to the height you desire. Visit a bed and bath retailer to find an extension that’s right for you.
What is the rough in height for a shower valve?
Shower Valve Height A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet. Install faucets at the same height as the valve, equidistant from the valve.
Should the shower door be higher than the shower head?
Shower heads should never be positioned opposite a door or other opening. Exceptions may be made for smaller or low-flow shower heads or shower heads that point straight down at the floor. A glass transom is located above a frameless glass shower door and can be fixed or movable.
How high should you tile a shower wall?
Shower Wall Tile Height 4-6″ Above The Shower Head: When tiling the walls inside your shower, we usually install the tile just is usually 4-6″ above the shower head. This protects most of your wall from water while leaving a bit of wall exposed to contrast the tile.
Are rainfall shower heads worth it?
Rain shower heads won’t give as good water pressure as a standard shower head. I’ve used a few rain shower heads in hotels and they do offer good pressure, but not as good as a standard shower head. The benefit of a rain shower head is more water flows over the body as it has a wider area of flow.
How far should a shower head be from the ceiling?
The tallest person using your shower should have at least a foot of clearance (accounting for at minimum a 3-inch shower arm and a head that’s a few inches tall so that the “rain” has some distance to actually fall).
How far is shower drain from wall?
Discharge hole (vertical): Drain located at floor height; distance is zero. Fixture (side to side buffer): Measured from center of the toilet to either side, minimum. clearance is 15 inches to any wall or other fixture; 18 inches is recommended if the bathroom layout allows for this.
Can you make a shower head lower?
This type of shower arm attaches to your existing shower arm pipe, acting as an extension, and then you can attach your existing shower head. From there, you can elevate or even lower the height of your shower head by loosening up the wing-nut fittings and retightening them in your ideal position.
Why are shower heads so low?
Low pressure in a shower can be caused by several issues such as a clogged showerhead, a worn-out mixing valve, closed valve, leaking pipe, or even a faulty water heater.
How far can shower head be from valve?
A showerhead can be 2-3 feet away from a valve as long as it’s integrated into the plumbing.
How far above the shower head should the tile go?
Shower tiles should generally be approximately six feet and two inches high in the shower. This height covers the minimum of three-fourths of the shower to keep water flowing into the drain and not seeping into the walls.
How much clearance do you need above a shower door?
Building codes require that a shower door open outward, as a door that only opens inward can easily become blocked if the occupant falls. Do be mindful when a shower door swings outward that there is enough clearance space, a minimum of 30 inches on either side of the door when it is open.
