Table of Contents
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What does the 265 70R17 mean?
How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.
What do all the numbers mean on a tire?
Every tire has 3 numbers that mean a specific size: The bigger the aspect ratio, the larger the sidewall of the tire. The last number, 15, is the rim diameter of the wheel that the tire will fit. The tire letter meaning refers to the construction of the tire: R for radial, D for diagonal, and RF for run-flat.
Can I use 225 tires instead of 215?
The diameter of 215 tires is much smaller than 225 models. Also, the aspect ratio of 215 tires is slightly higher compared to 225 tires. Therefore, there might be a minor change in the steering stability of both tires if used interchangeably. To sum up, yes, 215 and 225 models are interchangeable.
What is P265?
Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).
What does 65r17 mean?
This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.
Can I use 60 instead of 55 tires?
Most likely yes. The 55 or 60 in this case is the aspect ratio. It’s how tall the tire is as a percentage of its width. A 60 means the tire’s sidewall height is 60% of the width of the tire.
Which tire is wider 45 or 50?
got that 1 wrong, the 45 and 50 is a percentage of the width, so the difference between 45 and 50 profiles is 5% of the width.
Can I use 245 tires instead of 235?
So you have already identified the difference between 235 and 245 size tires. It is obvious that 245 is bigger than 235, still, both tires’ sizes are pretty common and could be interchangeable at times.
Is it OK to go up one tire size?
As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.
Do wider tires help in snow?
When it comes to the winter season, there are definite advantages to fitting your wheels with wide tires over standard narrow tires. A wider tire equates to better performance on dry or wet roads and compacted snow.
Is it OK to put 2 different size tires on a car?
Wheels and tires are not interchangeable words. Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.
What does the 113s mean on tires?
113 is the load rating, it means the tires can handle up to 2535 lbs. S is the speed index, which means the tires can go up to a speed of 112 mph. The office is open between 9am and 6pm EST. Thank you for your interest. Priority Tire ✅.
What does 70 mean on a tire?
If a tire has an aspect ratio of 70, it means the tire’s height is 70% of its width. Lower aspect ratio tires, such as a 60 series, generally offer vehicle handling performance advantages over higher aspect ratio tires, such as a 75 series, but a typical trade off can be ride harshness. Construction.
What does 115T mean on tires?
The 115T signifies that the tire has a 4ply standard load sidewall. The 121S signifies a 10 ply load range E sidewall. The standard load tire is best for a half ton truck, whereas the load range E sidewall is best for a 3/4 and 1 ton truck.
What does 102T mean on tires?
102T and 102H are service descriptions. 102 is the Load Index, what this means is, the tire is capable of carrying weight up to, 1,874 lbs per tire. The T and H are speed Ratings, this indicates that a tire is capable of speeds up to, 118 mph and 130 mph (respectively).
What does 100s mean on tires?
Understanding Tire Load Index Just after the tire size are some more numbers, commonly 100T. The 100 is the tire’s load index, and in the case of 100, it means by itself a properly inflated tire can hold up 800 kilograms (1,764 lb.).
What does 100h mean for tires?
H (Speed Rating): A speed rating of “H” means that this tire is designed to withstand speeds up to 130 miles per hour.
Which tire is wider 50 or 60?
For example, a 60-series tire features a sidewall that is 60% as tall as the tire’s section width. A 50-series tire will feature a shorter sidewall, at 50% of section width.
Are 55 or 65 tires wider?
205 is the height, the 55 is slightly wider than the 65 (it’s a ratio); and the 16 is the rim diameter.
What does r16 mean on a tire?
65 – This number is the Aspect Ratio, the ratio of sidewall height to width. R – Radial. 16 – This number designates the tire’s diameter in inches (i.e. 16″).
