Table of Contents
When the road surface is slippery, double your normal following distance. With ABS brakes, you should apply full pressure to the brakes. As the computer works to lock and unlock the brakes, you’ll feel a fluttering or vibration in the brake pedal.
When braking on slippery surfaces or during panic stops wheels of a vehicle without ABS might what?
Without ABS, a rapid, hard brake application could cause wheel lockup and loss of vehicle steering control, if the driver does not pump the brakes correctly or limit the brake pedal force to prevent wheel lockup. Therefore, more driver skill is needed to obtain short stops without ABS.”Jan 31, 2017.
When stopping on slippery surfaces with a non ABS equipped vehicle?
When driving on a slippery surface, never slam on your brakes. These sudden stops can throw you into a skid. If your vehicle is not equipped with anti-lock brakes keep steering control and wheels rolling by pumping the brake pedal.
When driving on a slippery road surface you should?
When driving on a slippery surface, such as snow or ice: Explanation To prevent skidding on slippery surfaces, you should shift to a low gear before going down a steep hill. You should also follow farther behind the vehicle in front of you than you normally would. Quick stops should be avoided.
When driving a car with antilock brakes if your brakes fail when you are trying to stop you should?
If you have anti-lock brakes, you should practice sudden stops on both dry and wet pavement in a safe off street situation. When using anti-lock brakes the rule of thumb is to press the pedal all the way to the floor. You will feel a strong vibration in the pedal which is a sign that the ABS is working properly.
What is the best way to prevent skidding on a slippery road surface?
To prevent skidding on slippery surfaces: Drive slowly and stay farther behind the vehicle ahead of you. Slow down as you approach curves and intersections. Avoid fast turns. Avoid quick stops. Shift to low gear before going down a steep hill.
What is the brake cover technique?
Covering the brake is a technique taught in driver education programs where the driver removes their right foot from the accelerator pedal and holds it over the brake pedal in readiness to slow down or stop quickly. Instead, the foot should be hovering just above the pedal.
What are the 4 factors involved in stopping distance?
4 Factors That Can Affect Your Stopping Distance Speed. The time it would take you to come to a halt isn’t just calculated by the time it takes you to press your brake pedal. View of the Road. Bad weather will affect the ability of your tyres to grip the road sufficiently. Weather. Tread.
How should you apply the brakes when you want to stop on a slippery road surface in a vehicle not equipped with anti-lock brakes?
Braking without ABS Press firmly down on the brake pedal, applying as much braking force as possible without inducing a skid. If you feel any of the wheels begin to lock up, release the brake pressure slightly and re-apply. Hold firmly until you stop.
When you try to stop on a slippery road the most recommended measure is the following?
Apply your parking brake. Pump your brakes. Explanation To slow down on a slippery road, you should first take your foot off the gas pedal. If you need to slow down even more, gently apply a slow, steady pressure to your brake pedal.
When your car starts to skid on a slippery road you should?
Accelerate. Steer right. Explanation If your vehicle starts to skid on a wet or icy road, look and steer in the direction you want to go. If the rear of your vehicle is skidding to the left, turn the wheel to the left.
When your car headlights fail you should?
Headlight Failure First, try your dimmer switch. Often that will turn them back on again. Try the headlight switch a few times. If that does not work, use your parking lights, hazard lights, or turn signals. Pull off the road as soon as you can and leave your hazard lights on so that other cars can see you.
When your brakes fail you should quizlet?
When your brakes fail, you need to pump the brake three or four times, downshift into lower gears, apply the parking brake, and search for an open zone. You just studied 10 terms!.
When you approach a car using high beams?
If an approaching car is using its high-beams, don’t look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.
How do I stop my car from skidding?
Prevent & Correct Your Car Skidding Slow down. Increase your stopping distance, so if the vehicle in front stops unexpectedly you have enough space to brake to a stop without skidding. Take extra care when approaching a bend. Be gentle and progressive when steering, accelerating and braking.
How do you stop skidding?
To prevent skidding on slippery surfaces: — Drive more slowly and stay farther behind the vehicle ahead. — Slow down as you approach curves and intersections. — Avoid fast turns.
What is the best way to prevent a skid?
Most skids occur on curves and turns, so be sure to slow down as you approach a curve or turn and then accelerate slowly while you are in it. While driving, keep your steering steady and do not make any abrupt direction changes or braking.
What is space cushion?
A space cushion is a buffer around your vehicle that you maintain to allow room to maneuver, if necessary. Know what is in your space cushion, scan frequently and maintain awareness of other vehicles.
What is squeeze braking?
Squeeze, set the nose of the car down, squeeze more if you need to, and ease up toward the end of the stop. It’s all about the transitions smoothly squeezing down, smoothly easing up. To make a quicker stop, we do all of the same things, just a little quicker.
Should you keep your foot on the brake when stopped?
When covering the brake, be careful not to rest your foot on the brake pedal (also known as riding the brake). Riding the brake is not recommended; it will only confuse other drivers and add unnecessary wear to the brakes.
What are 3 things that affect stopping distance?
Braking distance is a mathematical calculation of: original speed of the vehicle. the type of brake system in use. the reaction time of the driver/rider. the coefficient of friction between the tyres and the road surface – also known as the traction coefficient.
What is a car’s stopping distance not affected by?
Field of View – Visibility is one of a number of factors that do not affect your braking distance per se but can inhibit your thinking distance. The longer it takes for you to spot hazards in the road, the more time will have passed before you hit the brake pedal.
What 3 things make up your total stopping distance?
Stopping distance consists of three factors: Driver’s reaction time + Brake lag + Braking distance.
