Table of Contents
Well, MERV ratings range from 1 to 20, with 1 being the lowest level of filtration, and 20 being the highest. Filters that are MERV 16 through 20 are usually only found in hospitals, cleanrooms, and nuclear power plants. The home air filters you’re looking for are rated anywhere between MERV 5 and 13.
Is MERV 13 too high?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
Is MERV 13 too restrictive?
At this point, it’s also important to note: MERV ratings go above 13. However, they’re too restrictive for normal home HVAC systems, and thus using them can cause potentially expensive problems.
Is MERV 13 too high for home?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
What MERV rating should I use for Covid 19?
What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.
Can my HVAC handle MERV 11?
In most cases, a MERV 11 air filter isn’t too high for residential use. Meanwhile, air filters with a MERV 14 rating or higher are designed for commercial HVAC systems that can handle the thicker filter material.
Can my furnace handle MERV 11?
The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters, which is why millions of homeowners depend on them.
What MERV Can my furnace handle?
The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress.
What MERV rating can my HVAC handle?
The EPA recommends MERV ratings of 9-12 because it is the most effective at keeping your home’s air clean. A filter with this rating will prevent particulates as small as 1 micron from entering your HVAC system. This rating qualifies as HEPA (high-efficiency particulate absorption) level.
How often should MERV 13 filters be changed?
For Merv 8, 11 and 13 filters, we recommend that you change your filter at least every 3 months, however changing your filter every 2 months provides better filtration which provides healthier and cleaner air in your home.
Is a MERV 12 filter too restrictive?
The higher the MERV rating, the more restrictive the filter might be. Plus, a MERV 12 filter that is just 1” (one inch) thick will likely be more restrictive than a MERV 12 filter that is 4” (four inches) thick. A clogged air filter of the “right” MERV rating will do this too. Low airflow.
Is MERV 11 or 13 better?
A MERV 11 rated furnace filter can trap the majority of harmful contaminants that are present in the air. A MERV 13 filter is capable of filtering out all particle impurities like dust, lint, pollen, mold, dust mites, pet dander, smog, and smoke. On top of this, it can also trap bacteria and viruses.
Is MERV 11 better than 12?
The difference between 11 and 12, therefore, is quite negligible. We do not carry MERV 12; MERV 11 does just as good a job. MERV 12 filters trap 80 to 89 percent of average particles of 1.0 to 3.0 microns, with an average particle size efficiency of 90 percent or better. As you can see, they’re pretty close.
What MERV level is HEPA?
All HEPA filters have a rating of a MERV 17 or higher. A HEPA filter with a MERV 17 rating will trap 99.97% of air particles that are 0.3-1.0 micron in size and an even better % of particles below 0.3 microns and above (HEPA filters are rated at their worst performance).
What filter is best for COVID-19?
By itself, air cleaning or filtration is not enough to protect people from COVID-19.Air cleaners and HVAC filters in Homes it is designated as High-Efficiency Particulate Air (HEPA), it is CADR rated, or. the manufacturer states that the device will remove most particles in the size range below 1 um.
Can I use MERV 13 in my furnace?
MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. If you are wondering what MERV to try, keep these recommendations in mind; ASHRAE recommends MERV 6 or higher.
What MERV rating does Rheem recommend?
What MERV rating does Rheem recommend? Rheem recommends filters of MERV 8 and above. This MERV level is strong enough to remove substances like pollen, dust mites, dust and pet dander from the air.
Do HEPA filters have MERV ratings?
HEPA air filters are not MERV rated as they exceed the ASHRAE test protocol 52.2 used in determining the MERV ratings. All HEPA air filters must meet a minimum efficiency of 99.97% at 0.3 microns.
