QA

Question: What Does Of Mean On Samsung Fridge

What does 0f mean on Samsung refrigerator?

The Samsung fridge OF OF code means the refrigerator is in Display Mode, Demo Mode, or Showroom Mode. These modes are meant for displaying the appliance in a store or showroom, such as on the showroom floor at Home Depot, Lowe’s, Best Buy, etc.

How do you get a Samsung refrigerator out of demo mode?

To remove Demo mode from your fridge, press the ENERGY SAVER and POWER FREEZE buttons on your display simultaneously for 3 seconds. Please hold it until you hear a distinctive chime sound and both temperatures for the freezer and fridge are displayed.

How do you get a refrigerator out of demo mode?

With either refrigerator door opened, press and hold the REFRIGERATOR and ICE PLUS buttons at the same time for five seconds. After holding the buttons for five seconds, the control panel will beep, and the temperature settings will display to confirm that DEMO MODE is deactivated.

What are the symbols on my Samsung refrigerator?

Samsung Fridge Freezer Symbols Symbol Description Energy Saver icon This symbol is a two-prong plug, like that of an electric shaver, attached to a light bulb in the power cord. Freezer/Hold 3 sec for Power Freezer icon This symbol is simply a hexagon with an ice flake in the middle.

What does Rd mean on Samsung refrigerator?

• Forced Defrost Mode. • The Fridge (RD) defrost function can be activated. • You can check the Fridge current draw or defrost. voltage at the main PCB in this mode.

What should my Samsung refrigerator be set at?

On most models, the ideal temperature setting for the refrigerator is 38°F. For the freezer, the ideal temperature is -2°F. However, some models may have different recommendations on the control panel.

How do I know if my Samsung fridge is in demo mode?

In Demo mode, the refrigerator lights up and appears to be working. However, the cooling function is disabled, and the control panel turns on but does not work. If there is no cooling in the refrigerator or you can see the “O FF” or “OF OF” sign on the display, check if the refrigerator is in “Demo mode”.

What does demo mode do on Samsung?

Demo mode for the status bar allows you to force the status bar into a fixed state, useful for taking screenshots with a consistent status bar state, or testing different status icon permutations. Demo mode is available in recent versions of Android.

Why did my Samsung fridge go into demo mode?

It was not cool in either the fridge or freezer compartment. A call to Samsung had us power-cycle it, and reset the control panel. They say that it could have gone into demo mode in one of two ways: a power outage or someone pressing and holding the two buttons to turn cooling off.

How do you reset a Samsung refrigerator?

Samsung fridges that don’t have a dedicated reset button can usually be reset using a standard key combination. Press and hold the Power Cool and Power Freeze buttons simultaneously for five seconds. If the reset has worked, you’ll hear a chime, and the fridge will start back up with the default settings.

Why is my Samsung fridge running but not cooling?

One of the most common reasons why a Samsung refrigerator is not cooling is a faulty evaporator fan motor. It’s responsible for drawing cold air into the evaporator coils that circulate throughout the fridge. If it fails, there won’t be enough cold air in the refrigerator, preventing it from cooling.

Why is my Samsung fridge not cooling?

Check to make sure the door seals are not torn, weathered, or dirty. Dirty seals can cause gaps large enough to let in warm air, which affects cooling. If you notice dirty seals or frost build up around the gasket, clean them immediately and allow your refrigerator up to 24 hours to regain proper temperature.

What do the symbols on my freezer mean?

The three coloured indicator lights located inside the appliance show the operating mode of the freezer. Green Indicator is lit when the appliance is connected to the mains and will glow if there is electricity present. Red Indicator is lit to alert you of a high temperature warning.

Why is my Samsung fridge display flashing?

A blinking temperature display is trying to get your attention, typically because the temperature is too high and things need to cool down. It could also be because a door has been left open. Any other blinking lights may require a power cycle to correct the issue.

What does the snowflake symbol mean on freezer?

snowflake icon represents the number 1 or the least cold setting. The large snowflake icon represents 6 or the coldest setting. igloo icon. Fast Freeze (on some models) This setting causes the freezer to run continuously, driving the freezer temperature to the coldest possible temperature.

Does Samsung fridge fan run all the time?

Common solutions for: Samsung Refrigerator runs constantly. The condenser coils are usually located under the refrigerator. If the coils are significantly dirty, the refrigerator will run constantly in an effort to cool down. Your refrigerator’s condenser coils should be cleaned twice a year.

What number should my refrigerator be set at?

Temperature Setting It should be set between 37°F and 40°F—the ideal refrigerator temperature to keep food fresh and cold but not frozen. If you have a numbered dial setting instead of a temperature reading, the highest number is the coldest (usually 5).

Is 1 or 7 the coldest setting on a Samsung fridge?

Samsung fridge temperature settings 1-7 indicate how cold the fridge will be. The higher the number set the colder the fridge will maintain. Samsung fridge settings normally range from one to five with number one being the least cool setting, and number five the coldest.

Is 1 or 7 colder in a fridge?

So on a refrigerator what setting is coldest (1 to 5)? On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.