Table of Contents
Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.
Should I resurface or replace my asphalt driveway?
While resurfacing is a great option for your driveway, it’s not always the best measure. After about 15 years your driveway will naturally lose its structural value. If your driveway is this old, our experts recommend completely replacing the asphalt.
How long does it take to replace an asphalt driveway?
Once the site is prepared, most driveways can be installed within two days, and the majority take just a single day.
Which is cheaper concrete or asphalt?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
What is the cheapest option for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
Is it OK to put new asphalt over old asphalt?
A paving surface can be deteriorated but still maintain structural integrity in which an asphalt overlay is the proper solution. An existing asphalt surface is the best base for new asphalt. A tack coat is normally applied on the existing asphalt surface to help the new asphalt adhere to the existing surface.
What time of year is best to pave a driveway?
The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It’s possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn’t likely to bring about the best results possible.
Are there different grades of asphalt for driveways?
There are two different types of asphalt that are used for driveways. There is a 41A, also known as a driveway mix, and there is a 41b type. There is a big difference in the two types of asphalt.
What type of asphalt is best for driveways?
Hot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.
Is blacktop the same as asphalt?
The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.
How often should asphalt driveway be sealed?
Asphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing. Asphalt sealer comes in 5-gallon drums that sell from about $8 to $20.
What type of driveway is best?
Longevity: The longevity of an asphalt driveway is a lot higher than most other driveway options. Homeowners can expect their asphalt driveway to last at least 20 years. Durability: Asphalt driveways are hard wearing and durable. The seal that is applied on top of your asphalt driveway encourages greater longevity.
What is the most hard wearing driveway?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
What is the most durable driveway?
Concrete is perhaps the most durable and versatile driveway options. Concrete provides a smooth, stable and secure foundation that holds up well in most climate and requires minimal maintenance.
How can I save money on my driveway?
But there are low-cost options to consider when planning a new or replacement driveway. One of the best ways to save money is to use loose materials such as gravel, stone, or tar-and-chip (macadam) for your driveway surface.
How can I make my asphalt driveway look better?
How to Make an Old Asphalt Driveway Look Good Clearing Weeds. Pull or use weed killer on sprouting weeds and invasive grass to remove them from the edges or inside of cracks. Fill in Cracks. Cracks form in the asphalt from settling or from hot and cold expansion. Fill in Holes and Chips. Seal the Driveway.
How much does it cost to top coat a driveway?
The average cost for a contractor to sealcoat your asphalt driveway is $0.17 to $0.24 per square foot. Driveways measuring 480 square feet cost $80 to $115 to sealcoat. Larger driveways cost $170 to $240 to sealcoat. Cost ranges may vary by contractor and region.
How thick is an asphalt overlay?
The amount of asphalt overlay applied to the surface will vary depending on the thickness of the existing surface, but typically will be within 1.5″ to 2″ thick.
Can you pave over cracked asphalt?
An overlay can be appropriate if there are small issues like minor surface cracks, minor water damage, or if it’s uneven. The choice depends on the condition of the existing pavement. Making the wrong choice could lead to more costly repairs.
Should you edge an asphalt driveway?
Why is Asphalt Edging Important? Edging is essential because it serves two primary purposes. First, the grading of the driveway exists to take pressure away from the asphalt. Without grading, your driveway edges would start to crack from the weight of vehicles driving over them.
What causes asphalt to crumble?
Fuel and oil can quickly deteriorate your asphalt pavement surface. In addition, over time the fuel and oil begin to penetrate the surface and can break up the aggregates of the asphalt. Eventually, the surface may begin to crumble and you may see some depressions begin to form.
