Table of Contents
A car lift will optimize any space, so don’t fret if you’re concerned that your garage is too small. The car lift itself will fit into one bay space and it is optimal to have 11-12 feet clearance height. Garage Living can also modify how your garage doors open to accommodate a car lift.
How high does a garage ceiling need to be for a lift?
If you want to install a typical 2-post or 4-post lift in your garage, you need a ceiling that’s higher than 11 feet. While you can get a 2- or 4-post lift that works with a lower ceiling, almost all these lifts are not ANSI certified.
How tall is a 2 post car lift?
The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.
How much room do you need to install a car lift?
As a guideline, count six feet for space underneath, five to six feet for vehicle height and one foot of clearance. That means you need a minimum of 12 feet of ceiling height to comfortably install and work with your auto lift.
How thick should concrete be to install a car lift?
That’s the minimum – however if you’re installing a new slab, it’s a great idea to plan around a slightly deeper concrete for even better strength – a least 6 inches thickness concrete is our recommendation.
How thick does concrete need to be to install a lift?
For a proper lift installation, begin by evaluating your concrete area and its existing specifications. This begins by inspecting your concrete slab to make sure it’s an adequate 4.25” thickness or more, has cured at least 28 days, and the surface has no more than a 3-degree slope.
How much height do I need for a lift?
Typically, a 12-foot minimum clearance, floor to ceiling, is required for your general two-post lift. Higher ceiling height is required for some of the four-post storage lifts and anything designed for larger trucks. For personal or hobby shops, many people purchase or reference Behm Design plans.
How tall is a BendPak lift?
Capacity / 150” Overall Height. Our standard-height GP-7 is fit for garages with 13′ ceilings and offers a full 78″ max rise.
Can I put a lift in my garage?
You can put a car lift in your garage, as there are units that will work in a home garage, provided it is well installed, and your garage meets specific requirements regarding the thickness of the concrete floor and the height of the building.
Which is better 2 post or 4 post lift?
A four post lift takes up much more room than a two post lift. A two post lift will raise a car “higher” in a low ceiling garage. If you have a 10 foot ceiling, the two post lift will raise most vehicles to about 6 feet off the ground. A four post lift makes it much easier to load and position the vehicle.
How much room do I need for a 2 post lift?
The basic rule is that you need the pads to be 12″ wider on each side from the base plates of the lift. For a 2 post, you’ll need to go down at least 2 feet. For a 4 post, you’ll need to go down at least 6 inches. New concrete also must also cure at least 28 days before installing your car lift.
How far from the wall should a 2 post lift be?
If your lift has asymmetric arms, then we recommend the center of the columns should be set about 9-10 feet off the front wall. If your lift has symmetric arms, then we recommend that the center of your columns should be about 12 feet off the front wall.
How long does concrete need to cure before installing a lift?
New concrete must be adequately cured for at least 30 days. DO NOT install auto lift on any asphalt surface or any surface other than concrete. DO NOT install auto lift on expansion seams or on cracked or defective concrete.
How many yards of concrete do I need for a 24×24 slab?
For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
Can you put a car lift outside?
Technically, the correct answer is, “You can put it outside (as in, who’s stopping you?), but should you?” Lifts are designed for indoor use, installed in a temperature-controlled environment. Moisture will damage the lift.
How thick should garage floor be for lift?
The manufacturer recommends slab thickness of 4 inches. We’re pouring 5 inches for the entire floor.
Are 2 post lifts safe?
Two-post car lifts are some of the most popular lifts in the world. They’re safe and reliable when used correctly, and they have high lift capacities. These facts remain true for every car lift of every brand, by the way.
Do you need rebar in a garage floor?
A garage slab or the garage concrete floor does not need rebars, provided it is 4” or less in thickness. Other forms of concrete reinforcement will however reduce cracks. Rebar is certainly required if the garage slab is 6” or thicker.
Will a 4 post lift fit in my garage?
Your garage needs enough space before you can install an auto lift. The typical measurements for a 4-post car lift is 103 inches wide by 173 inches long. If the cars you work on fall in this range, then this type of lift may be right for you.
Which 4 post lift is best?
Our Top Ten 4 post car lift Reviews Triumph NSS-8 4 Post Storage Service Lift. Triumph 9000-Pound 4-post Automotive Lift. Auto Lift 4-Post Car Storage Lift. Bendpak 4-postTruck And Car Lift. Bendpak Compact 4 Post Car Lift. Bendpak 4 Post Wide-Standard Car Lift. Atlas Apex 14000 Pound 4 Post Car Lift.
