Table of Contents
4. How many chairs should I fit around a table? Plan for at least 2 feet of table surface for each chair. For example, a 10-foot-long table can have five chairs across and two at each end to seat 12 people.
How long is a table that seats 10?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How many feet is a table that seats 10?
It is possible to fit 10 seats on a rectangle table size of 8–10 feet x 3’6″–4’6″ (244–305cm x 110–140cm). To seat 10, five side-by-side, you should aim for a minimum length of 10 feet and width of 2 feet 6 inches (305 x 76cm).
How big is a table that seats 12?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How many feet is a table that seats 8?
For an 8 foot, or 30 inch by 96 inch rectangular table, you can comfortably sit 8-10 people, with 4 chairs on either side and 1 chair at either end.
What size table seats 10 comfortably?
An 84″ rectangular dining table can seat up to 8 people comfortably. A 90″ rectangular dining table can seat up to 8 people comfortably. A 108″ rectangular dining table can seat up to 10 people comfortably. A 130″ rectangular dining table can seat up to 10 people comfortably.
How big of a table can I fit in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
How big is a 10 table?
A 72” – 84” long rectangular table can seat up to 10 adults, depending on table width. A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.
How long is a 12 dining table?
Standard Dining Table Sizes Seats Length 4-6 68-72″ 6-8 72-80″ 8-10 80-92″ 10-12 92-110″.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How long is a 6 seater dining table?
Dining Table Size Guide Size of Dining Table Length Width 4 seater dining table 75cm – 90cm 75cm – 90cm 6 seater dining table 118cm – 140cm 75cm – 90cm 8 seater dining table 150cm – 220cm 75cm – 90cm 10 seater dining table 180cm – 280cm 90cm – 100cm.
How long is a dining table that seats 8?
Rectangular and Oval Dining People 2 No Shared area 2′ x 2’6″ (61 x 76cm) Minimum Size (with shared area) 2′ x 3′ (61 x 91cm) 6 6′ x 2’6″ (183 x 76cm) 6’6″ x 3′ (198 x 91cm) 8 8′ x 2’6″ (244 x 76cm) 8’6″ x 3′ (259 x 91cm) 10 10′ x 2’6″ (305 x 76cm) 10’6″ x 3′ (320 x 91cm) 12 12′ x 2’6″ (366 x 76cm) 10’6″ x 4′ (320 x 122cm).
How long is a table that seats 6?
To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.
How much space do you need for table seating?
The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.
How many does a 90 inch table seat?
Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.
How many people can a 48 square table seat?
A 48″ table can usually accommodate 5-6 people, but for larger groups, you’ll want a table that is 60″ in diameter or larger.
What size is a round table that seats 10?
What size round table seats 10? A round table that’s 8 feet in diameter can seat 10 to 12 people.
How do you pick the right size dining table?
Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3′ clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12′ x 9½’ space, the maximum size for your table would be 72” x 40”.
Is Ash good for tabletop?
With its typical straight grain and beige-to-light-brown hue, ash wood is a very attractive option for fine furniture. Its characteristics as a lightweight and shock-resistant wood have made it a favorite for baseball bats, tool handles, and restaurant furniture.
How many does a 60 inch table seat?
The 60 inch, or 150 centimeter, round banquet table, seating 8 or 10 people, is possibly the worst invention in the history of the hospitality industry.
How many long tables do you need for 50 guests?
The math is pretty simple here if you want to just go with the blind rule of 1 table per 10 guests. That’s 5 cocktail tables for 50 guests and 6 tables for 60 guests.
How many can you seat at a 72 inch round table?
Seating Planner Seating Capacity for Tables Table Size Number of People 72 inch Round (6′) Seats 10 – 12 Adults 60 inch Round (5′) Seats 8 – 10 Adults 48 inch Round (4′) Seats 6 – 8 Adults.
