Table of Contents
Before deciding on what to put under your above ground pool, you need to decide on where to put your Intex pool. Popular options are grass, concrete, pavers, gravel, dirt and on decks. Concrete is probably the best option since it is usually 100% level and smooth.
What is the best thing to put under a swimming pool?
Pool Floor Padding By far the best material to place under a swimming pool liner is Armor Shield or Gorilla Pad. These materials are breathable allowing moisture to escape and are extremely tough, keeping insects and moles from coming through and piercing the vinyl pool liner.
Do you really need sand under a pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
Can I put a tarp under my pool?
Installation Tips At the bare minimum, yes you should put a tarp underneath your Intex pool. Inflatable pools, Bestway and Summer Ways pools will also benefit from a tarp. Although a tarp will help protect your pool there are far better choices such as foam tiles or proper commercial under pool pads.
Can you put above ground pool on grass?
While you could place your pool directly on top of your grass, that isn’t the best idea. The grass isn’t a firm base since it is alive and growing. The most common materials to use as a base for above ground pools include concrete pads, commercial pads, sand, solid foam, carpet padding, and flooring underlayment.
Can you put Styrofoam under a pool?
The Styrofoam lowers the cost of protecting the bottom of the pool liner and possibly offers better protection than the pads. Install the Styrofoam pad after the sides of the aboveground pool are installed. Place four-by-8-foot sheets on the ground and fasten them together with duct tape.
Can you use carpet padding under a pool?
Traditional felt carpet padding is usually frowned upon as a pool padding material, according to the Pool Homeschool blog, but modern closed-cell foam carpet pads can work well. Those marketed as “memory foam” pads work for an above-ground pool sitting on concrete.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
How do you prepare the ground for an Intex pool?
The Right Way: Mark the perimeter of your pool, and add 1 foot of extra space to all sides. Use a line level to measure at 12-36 points around the pool. Then use flat shovels or a sod cutter machine to remove turf and lower the high spots. Add a one inch layer of sand.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
Can I put a pool on artificial grass?
Yes, you can place an inflatable pool on your artificial lawn and the grass will not discolour or die. Artificial grass around the swimming pool will be used more intensively which will flatten the grass more than if it were only used as a decorative lawn.
Can I put a pool on concrete?
The good news is, yes, you can install your above ground pool on concrete if a sand or soil base is not possible. Aside from the pool liner, you should have something like Armor Shield or Gorilla Pad and a pool cove, as well, to avoid punctures. Using sand or soil over concrete is not advisable as it can be washed off.
Can I put plywood under my pool?
Plywood can serve as a level foundation for a swimming pool.
Can you put a pool on pavers?
An above-ground pool can be put on pavers, but it’s not a typical application. To install a pool on top of pavers, the pool needs to have a base that is cushioned and leveled for this type of installation. An above-ground pool on pavers is possible but not recommended by pool installation experts.
What do I put under my Intex pool legs?
It is best to put a 1ft-by-1ft concrete block paver under each leg of your above ground pool. These blocks can take the pressure and they don’t get mold, insects, or other forms of deterioration issues. By properly supporting the pool legs, you won’t damage the legs over time and have to dig them out to remove later.
What happens if ground is not level for pool?
What happens if an above ground pool is not level, though? If an above ground pool is not level, the water’s weight can cause damage to the walls and liner. As a result, your pool will collapse, potentially causing property damage or personal injury.
What is the easiest way to level a ground for a pool?
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
