Table of Contents
How big is a standard bale of pine straw? Unfortunately, there is no standard bale size. We bale a 13”x12”x27” (2.43 cubit ft.) bale that loads 1386 bales on a 53′ trailer.
How do you calculate bales of pine straw?
Multiply the length times the width of each of your beds. Then add all your totals up and divide by 100, then multiply by 3 and that is the number of bales you will use.
What is the standard size of a bale of straw?
A standard size bale should be 14 inches high, 18 inches wide and between 36 to 40 inches long.
How many square feet are in a pine straw bale?
Each bale will cover approximately 35-40 square feet when applying the recommended 2″-3″.
How heavy is a pine straw bale?
Pine straw bales are usually square and 28 to 36 inches long. They can weigh between 30 and 60 pounds. There is no official size, but an average bale weighs about 40 to 45 pounds. Know how to sell your pine straw Method #1: You do all the work.
How much area does a roll of pine straw cover?
Pine Straw – Roll of Pine Straw Our rolls are easy to distribute and a long lasting mulch alternative. Each bale covers approximately 100 square feet. Coverage estimates are based on a settled pinestraw depth of approximately 3 inches. Each bale is compressed for shipping.
How deep should pine straw be?
In general, plan to apply to a depth of about 3 inches, adding approximately an inch annually to maintain a good depth. The main goal is to prevent weed growth and enhance the beauty of your yard with ground cover. Your application of pine straw needs to be at least 3 inches thick.
How much does a 2 string bale of straw weigh?
Two string square hay bales: Weight from 40 to 60 lbs.
How big is a bale?
Rectangle Bales Size Dimension(L x H x W) Weight 2 stringed bale 36 inches x 19 inches x 16 inches 40 to 75 lbs. 3 stringed bale 44 inches x 22 inches x 15 inches 100 to 140 lbs. Half ton 6 ft x 4 ft x 3 ft 1000 lbs. 1 Ton 8 ft x 4 ft x 4 ft 2000 lbs.
How much is a bale of straw?
Small square bales averaged $4.60 a bale (range of $2.00 to $6.00). Large square bale straw averaged $64.00 per bale (a range of $40.00 to $90.00). Large round bale straw averaged $58.00 per bale (a range of $40.00 – $85.00). In Nebraska, hay sold steady, demand is light in 2020.
How many straw bales do I need?
Once you have all of the openings removed, divide the total square footage by the square footage of your bales. For this, consider a 14″ tall by 36″ long bale would have 504 square inches or 3.5 square feet of bale surface area. This will give you the exact number of bales you will need to build the structure.
How much straw Do I Need?
When applied properly, approximately 20-40 percent of the original ground surface can be seen. The application rate per acre should be about 2 tons (or one 74 pound bale per 800 square feet). Straw should be clean rice, barley, or wheat straw.
How big is a pine needle Bale?
Pine straw bales are usually square and 28 to 36 inches long. They can weigh between 30 and 60 pounds. There is no official size, but an average bale weighs about 40 to 45 pounds.
Are pine needles good for mulching?
Pine Needles Can Work as Mulch Pine needles, also known as pine straw, make fine mulch for some flower beds. They are light and fluffy, so spreading them around is a piece of cake, and they don’t compact much as they decompose, so you don’t have to worry about them becoming too thick or forming a rain-impervious mat.
Does Menards sell bales of straw?
Complete your fall decorations with a 12″ x 12″ x 24″ bale of bright golden, sun-bleached straw. The bale is bound with bale wire for an authentic look. It is perfect for indoor or outdoor home décor and is great for displaying your seasonal foliage.
How many bales of hay do you need to cover grass seed?
Applying Straw and Hay A shallow layer of straw is all that’s needed to help retain moisture for the soil and fresh seeds. One bale of straw covers approximately 2,000 square feet. Sprinkling it in a light layer allows it to decompose naturally so you won’t have to rake it up once the grass has sprouted.
How many mulch do I need?
Keep in mind that mulch is sold by the cubic yard. One cubic yard of the material covers a 324-square-foot area an inch deep. So, to determine your total, multiply your square footage by the depth in inches desired, then divide by 324. Here’s your formula: Square footage x desired depth / 324 = cubic yards needed.
What’s the difference between pine needles and pine straw?
The term “pine straw” refers to pine needles which are harvested after having fallen from pine trees. They are tied together with either wire or string into a unit most commonly called a “bale”, although it is sometimes sold in rolls (which tend to be roughly two to two and a half times larger than bales) as well.
Do termites eat pine straw?
Bugs don’t eat dry pine straw, but other qualities draw in bugs including termites, centipedes and earwigs. Some of these insects help break the pine straw down, which is good for deterring weeds, but for the most part its best to keep critters away from your house.
