Table of Contents
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What does the 265 70R17 mean?
How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.
Can I use 225 tires instead of 215?
The diameter of 215 tires is much smaller than 225 models. Also, the aspect ratio of 215 tires is slightly higher compared to 225 tires. Therefore, there might be a minor change in the steering stability of both tires if used interchangeably. To sum up, yes, 215 and 225 models are interchangeable.
What do all the numbers mean on a tire?
Every tire has 3 numbers that mean a specific size: The bigger the aspect ratio, the larger the sidewall of the tire. The last number, 15, is the rim diameter of the wheel that the tire will fit. The tire letter meaning refers to the construction of the tire: R for radial, D for diagonal, and RF for run-flat.
What size tire is 255 70R17?
Tire Size Calculator – Tire & Wheel Plus Sizing BETA Unit: Imperial Imperial Metric Section Width 10.04 in Rim Diameter 17.00 in Rim Width Range 6.50 in – 8.50 in Overall Diameter 31.06 in.
What does P265 mean in tires?
Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).
Is it OK to go up one tire size?
As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.
Do wider tires help in snow?
When it comes to the winter season, there are definite advantages to fitting your wheels with wide tires over standard narrow tires. A wider tire equates to better performance on dry or wet roads and compacted snow.
How wide should my tires be?
For sports cars, the general rule of thumb is to match the wheel width to the tread width in inches. For example a tire size 285/35-19 has a tread width of 9.9″. The ideal wheel width would be 10.0″ for that tire.
Can I use 60 instead of 55 tires?
Most likely yes. The 55 or 60 in this case is the aspect ratio. It’s how tall the tire is as a percentage of its width. A 60 means the tire’s sidewall height is 60% of the width of the tire.
Can I use 245 tires instead of 235?
So you have already identified the difference between 235 and 245 size tires. It is obvious that 245 is bigger than 235, still, both tires’ sizes are pretty common and could be interchangeable at times.
Will a 65 tire fit a 60?
Yes, the only real difference is that ratio between the tread width and the height of the sidewall will change. The lower the middle number the lower the profile of the tire the larger the number the higher the tire profile.
What size is 265 75R17 in inches?
Plus Sizes 265/75-17 265/70-17 Diameter inches (mm) 32.65 (829.3) 31.61 (802.8) Width inches (mm) 10.43 (265) 10.43 (265) Circum. inches (mm) 102.57 (2605.32) 99.29 (2522.07) Sidewall Height inches (mm) 7.82 (198.75) 7.3 (185.5).
What does lt285 70R17 mean?
This number indicates that your tire has a width of 285 millimeters. 70. This number means that your tire has an aspect ratio of 70%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 70% of the width.
How tall is a 295 70R17 tire?
Open Country M/T 295/70R17 Tire Specs Size Diameter Width LT295/70R17 128P E BSW 33.5″ 11.9″.
What does 65R17 mean?
This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.
What does LT265 75R16 mean?
This formula is a quick way to get the tire diameter of those metric tires that are common on just about everything stock. For example a LT265/75R16 would be around 31.6 inches tall and 10 inches wide. “LT” means Light Truck and “P” means Passenger tire. The bigger number (on the left) is the Section Width.
What does 113 mean on a tire?
113 is the load rating, it means the tires can handle up to 2535 lbs. S is the speed index, which means the tires can go up to a speed of 112 mph.
Can I use 255 tires instead of 265?
In principle yes, if a rim came with a 265 wide tire, a 255 will fit to.
Can I use 245 tires instead of 225?
245 and 225 are both tire size not rim sizing. You need to figure out what size rims you have. An example of rim sizing would be 8×18 that would be 8 inch wide and 18 inch diameter.
How much bigger is a 285 tire than a 265?
Plus Sizes 265/75-16 285/75-16 Diameter inches (mm) 31.65 (803.9) 32.83 (833.9) Width inches (mm) 10.43 (265) 11.22 (285) Circum. inches (mm) 99.43 (2525.53) 103.14 (2619.77) Sidewall Height inches (mm) 7.82 (198.75) 8.42 (213.75).
