Table of Contents
1. Wait at least 3 full days before allowing traffic on the new asphalt. Since asphalt needs time to harden and cure, usually 6-12 months, your parking lot or driveway will remain soft and pliable until then.
What happens if you drive on asphalt too soon?
DO NOT Drive on Fresh Asphalt for at Least 24 Hours If you drive on freshly laid asphalt too soon you could cause ruts and dips to appear. Ruts and dips will hold water and debris which will cause additional damage to your asphalt.
Can you drive on asphalt after its laid?
It is best to wait at least 24 hours before driving on the new surface. We often advise that you wait longer during hot weather. Following installation, be sure to follow a regular preventative maintenance plan, including sealcoating and crack filling, to keep your asphalt looking its best.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
How soon after asphalt is laid should it be sealed?
After laying asphalt, you should wait at least 30 days before sealing your commercial parking lot. For residential parking lots, it is best to wait 90 days. Otherwise, you risk sealing your new asphalt before it is hard enough to withstand elements like power steering.
Is it OK to rain on new asphalt?
In general, asphalt cannot be installed when it is raining. When rain comes into contact with fresh asphalt, it causes the oil to rise to the surface which can affect the curing time and the finished product. If asphalt is paved while it’s raining, it can reduce the overall quality of the asphalt.
How long does it take for asphalt to dry after rain?
While your driveway may be dry a day after paving, it still needs some time to cure. Typically, you want to keep the pavement dry for at least two days, minimally, so make sure that rain isn’t going to be an issue before you start your driveway paving in this situation.
Does asphalt cure in cold weather?
The Ideal Temp for Asphalt Installation During installation, cold temperatures can prevent asphalt from properly binding which causes raveling. Extreme heat can cause new asphalt to melt, slough, bruise and won’t allow asphalt to properly cure. Both extreme cold and extreme heat make for a poor asphalt installation.
Why do they put sand on new asphalt?
Asphalt cement is the binder, or glue, that holds together the sand and stones that make up a blacktop drive, road or parking lot. The stones and sand in blacktop are immune to UV damage from the sun.
How do you care for a new asphalt driveway?
Caring For Your New Asphalt Driveway Do not drive on your new driveway for 3-5 days. Wait up to 14 days before parking on your new driveway. And when you do, only park on it during the cool part of the day.
How warm does it need to be to pave asphalt?
During initial application, the asphalt should still be at least 220 to 290-degrees Fahrenheit. If the asphalt dips below approximately 185-degrees Fahrenheit before compaction is complete, its consistency stiffens up too much to finish the job properly.
Does thicker asphalt last longer?
Adding extra blacktop thickness will not significantly extend the life of the surface. Keep in mind that blacktop is available in many different blends and mixtures. Each mixture has its own recipe of the sand, gravel and liquid asphalt components. Talk with each contractor and ask which blend is best for your area.
Can I put asphalt over concrete?
It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
Should you seal a brand new asphalt driveway?
For starters, never seal a new asphalt driveway. Asphalt needs a minimum of six months for the oils in it to evaporate. If you apply driveway sealer before your asphalt has time to cure, it won’t achieve the necessary hardness and all your work will be for naught.
How often should asphalt driveway be sealed?
Asphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing. Asphalt sealer comes in 5-gallon drums that sell from about $8 to $20.
Should a new driveway has puddles?
Asphalt is a very hard and dense material, once it has set. Prior to curing and setting, it is very soft. If you don’t allow it to harden completely and use it before it does so, then, you can guarantee you will have puddles on your brand-new driveway.
Should you water fresh asphalt?
Even when cured, asphalt can sometimes soften in extremely hot weather and harden as temperatures fall. To temporarily harden hot asphalt, you can water it down with a garden hose. Do not be alarmed if soapsuds appear. Large, heavy vehicles can depress your new asphalt and create ruts in your new blacktop.
How do you keep asphalt from sticking to tamper?
You can also use a 6 by 6 or 4 by 4 piece of wood and just tamp the patch by hand or just use a vibrating plate which is the easiest method. Note: If the cold patch sticks to your tamper use and old oiled up rag and it will keep the Asphalt off.
How long does asphalt take to cure in cold weather?
However, the cold patch still takes 12-36 hours to dry, and about 30 to 90 days to cure. Using cold patch asphalt to repair is easy. Here is how to use cold patch asphalt to fill dents or potholes: Remove all loose asphalt from the pothole.
