Table of Contents
Do you need drop shocks with drop spindles?
No. You do not need to use a drop shock when using 2” drop spindles because the spindle shaft and the pickup points for the caliper have been moved up. A stock or aftermarket lowering spring makes for a shorter height and therefore you need a shorter compression on the shock. Feb 1, 2017.
What are 2 inch drop spindles?
These drop spindles allow you to keep your stock coil, stock shock, steering geometry and get a 2-inch drop without any other modifications. The only issue with these drop spindles is that on ’63-70 trucks it widens the track width inch per side. In 1971, GM released trucks that came standard with disc brakes.
Where do drop spindles go?
Drop-spindles relocate the shaft to a higher position, typically 2-3 inches higher than the original. Doing this allows your wheel to be higher in the fender well, thus lowering your truck. Installing drop-spindles allows you to continue to use the vehicles factory spring and shocks.
How do you measure drop spindles?
In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube.
Do drop spindles affect ride quality?
Drop spindles are probably one of the best ways to lower your vehicle properly by two or three inches without affecting the ride quality or factory suspension geometry. Combining drop spindles with a two-inch lowering coil can give you up to four inches of drop.
Do you need new shocks for 2 inch drop?
From what I have read about lowering our trucks, you do not need to replace the front shocks with only an 2″ drop. The OEM ones will still work. I believe the OEM ones will work for the rear also with your drop. Anything over 3″ would require new shocks.
Can you use drop spindles with coilovers?
Remember, you can use a drop spindle in conjunction with a coil-over to lower the car up to 4 inches. If you are considering both and don’t know how low you want to go, start with the coil-over seeing it has height adjustability built into it where a drop spindle offers no options.
What are drop spindles used for?
Drop Spindles are a popular type of suspended spindle and get their name because the spindle is allowed to drop down while the thread is formed, allowing for a greater length of yarn to be spun before winding on. Suspended spindles also permit the spinner to move around while spinning, going about their day.
How much is a spindle for a car?
How Much Does a Spindle Cost? Spindles can cost anywhere between $75 and $400. The price largely depends on whether you’re going to get an individual spindle or a pair. The spindle’s price also varies because of the complexity of the design, which will depend on the vehicle’s make and model.
What are drop coils?
Drop Coil Springs are a quick and easy way to lower a truck. Use just coils or combine with Drop Spindles for an even lower ride. If dropping the front 2″ or more with coil springs then shorter front shocks are needed.
How do you measure axle drop?
How to Measure a Trailer Axle The Drop is measured from the centerline of spindle to the bottom of the main axle tube. The distance from the center of one spring to the center of the other spring is called the Spring Center. Axle Types: Straight Axles are simply a straight square or round bar.
What is a modular spindle?
Classic Performance modular drop spindles are designed to help solve the tire to fender interference commonly found on lowered vehicles. Classic Performance modular drop spindles offer adjustable steering stops and allow for an additional 1 1/8 in. more of fender to tire clearance.
Is it better to lower with springs or spindles?
The advantage of going with dropped spindles is stock springs and shocks can be used. Dropped spindles will lower the ride height yet maintain normal suspension clearances. The draw back is cost and additional labor.
How much does it cost to lower your truck?
This is the most expensive option to lower your vehicle’s suspension. The most affordable hydraulic suspension kits cost around $1,300, while the high-end ones can exceed $10,000. Professional installation adds anywhere between $2,000 and $5,000.
How many inches does a flip kit drop?
A flip kit is designed to move the rear axle of your truck from being underneath the leaf spring pack to being on top of the leaf spring pack. This will generally give about six inches of lowering to the back of your truck.
Do lowering springs improve handling?
Better Handling Because lowering means getting stiffer springs, there is less weight transfer when you hit the gas or brake hard. This means you’ll enjoy faster acceleration and quicker stops.
