Table of Contents
Can I install a fireplace insert myself?
So, yes, you can install your dream fireplace or wood-burning stove yourself, provided you have the expertise. However, it’s highly recommended that you hire a contractor with experience specific to fireplace installations.
Can I put a wood stove insert in my fireplace?
Stoves can be added to a fireplace in several ways. Free-standing stoves can be installed so that the stove pipe enters into the fireplace chimney above the damper, through the damper or into the firebox below the damper. Properly designed stoves can also be inserted into the fireplace opening.
Do you need a chimney liner for a wood stove insert?
When an insert has no liner, or a partial liner, it cannot be cleaned in the normal way (by putting a brush into the chimney through the insert). Doing so would cause ash and creosote to fall behind the insert, where it would build up and potentially ignite.
Are fireplace inserts worth it?
Are Fireplace Inserts Worth the Money? Savings: Fireplace inserts can help you to cut down on your heating bill. A fireplace insert is not recommended as a sole use of heating but when used in conjunction with turning down your thermostat, can save you money on your heating bill.
How far does a wood stove need to be away from a brick wall?
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.
What kind of chimney do I need for a wood stove?
A prefabricated metal chimney unit may be the best choice for wood stoves or fireplaces in these homes. Prefabricated chimneys are easier to erect than masonry units, and although materials cost more, total unit cost will be nearly the same.
How much is a chimney liner cost?
The average cost to have a chimney lined by a professional is going to be about $2500. Depending on the type of chimney liner, it could cost up to $10,000. The average DIY chimney liner installation is going to cost about $750 and could cost as high as $3000 for the material.
Do chimneys need to be lined?
It is usually recommended you line your chimney to keep it working as safely and efficiently as possible. Flue liners are needed for a number of reasons: The chimney or flue may have lost integrity over time and may become eroded and rough. If the chimney is too cold, smoke won’t rise through the chimney properly.
How do you seal a fireplace insert?
Adhesive Strips Available at many hardware and home improvement stores, small rolls of fiberglass-based stripping can be cut to size and applied in noticeable gaps between an insert and the masonry on the outside face of a fireplace, underneath the insert.
Can you install a fireplace insert without a fireplace?
No, you do not need an existing fireplace–a pellet insert can be installed without a fireplace.
How much does a wood stove insert cost?
Wood Stove Insert Cost An average wood stove insert costs $1,200 to $3,400 to install with a chimney liner or vent pipe, depending on the square footage you need to heat. Inserts fit inside your existing fireplace and heat 1,000 to 3,000 square feet depending on their size.
How much does it cost to install a wood stove insert?
Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select.
Do wood stove inserts need electricity?
As with freestanding wood stoves, wood fireplace inserts won’t typically require a source of electricity. If a wood insert has a blower then it will typically require an electrical supply in order to operate.
Can a wood stove vent through wall?
Venting is an important component of all stoves. And wood, gas, and pellet stoves have different venting systems. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.
Can you pipe a wood stove out the side of your house?
If you’re setting up a wood-burning stove or pellet stove, running the chimney pipe through an outside wall saves the time and costs of installing a vertical chimney that requires a ceiling collar and roof flashing. For brick or stone walls, enlist a professional to cut the holes.
Can I use single wall stove pipe inside?
Use Single Wall Black Stove Pipe from your stove to a thimble or ceiling transition box, never inside a combustible wall or inside a chimney chase. An 18 inch clearance to combustibles is required and these pipes feature an unheard of fume-free finish.
What do you put on the wall behind a wood stove?
The fireback is a traditional heat shield for a stove The solution of replacing the back wall with a heat-resistant material, such as heat-resistant stones or a wood stove heat shield, is often cumbersome and not always beautiful.
How close can a wood stove be to a rock wall?
This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood. The 36-inch recommendation applies to any type of heat-resistant material, such as one-quarter-inch millboard that is nailed directly to the wall.
How much does a new fireplace insert cost?
Gas fireplace inserts are installed in pre-existing, wood-burning fireplaces, making the overall cost far lower than installing an entirely new system. The insert itself will cost around $1,200, with labor costs running between $500 and $3,500 depending on the complexity of the job.
How does an insert stove work?
Inset stoves have a fan that distributes the hot air back into the room rather than heating the chimney breast or surrounding bricks. With modern stoves, there is the ability to pipe this heat into another room. Some people get their inset stove installed and don’t consider this a useful feature.
