Table of Contents
How are Kickboards attached?
Place your kickboard underneath your cabinets, flush up against the legs. Measure from the front of the cabinet carcase edge to the kickboard. Add half the thickness of your kickboard material to the above measurement to get your drilling distance. Mark this measurement along a line on the cabinet’s bottom panel.
How Deep is a kick plate on kitchen cabinets?
The optimal depth for a toe kick is 3 inches. This provides an adequate recess to stand comfortably and maintain balance while working at a countertop. Almost all factory-made stock cabinets will comply with this depth standard.
Can I glue toe kick?
Toe kick is attached with a nail gun or adhesive after the cabinets are installed.
How do you join a kitchen kickboard?
Place the plinth at the bottom of a base unit. Two Plinths can be joined to each other by making a metal join between the two. Take a thin but good quality metal sheet of your choice. Drill the metal strip to fix it on a plinth. Keep both the plinths in contact with each other and level them carefully.
How high should a kick plate be?
Kick Plate Kick Plates are traditionally 6″ or 8″ in height. But as mentioned before, this can be down to personal preference. For a standard-sized door, a 6″ Kick Plate will suffice, but if you have a larger sized door, you should consider something taller like an 8″ Kick Plate.
What side of the door does the kick plate go on?
A kick plate is installed at the bottom of the door on the push side and ranges in height from 8” to 16”. This style of protection plate is the most common form of commercial door protection.
What is a kick plate?
Door kick plates are a sheet of material attached to the bottom of your door to protect it from damage. They get their name from when people kick the door open when they have their hands full. If your door is made from a cheaper material then it’s likely to get damaged over time as people kick the door open over time.
What is the standard size for a toe kick on cabinets?
Toe Kick. Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches. The toe kick is an ergonomic feature which places countertops and cabinets within arm’s length.
Is a toe kick necessary?
Why Would I Need A Toe Kick Molding? Toe kick spaces are an important element of kitchen design. In fact, any cabinet that you would stand in front of should have one. The purpose of a toe kick is to create a recess for your feet, which allows you to stand closer to the countertop or workspace more comfortably.
Do you install toe kicks before or after flooring?
Regardless of what you choose, the established standard for the top of the counter is about 36 inches above the floor. It’s also important to note that, if you’re including toe kick drawers in your kitchen design, put flooring down first to ensure that the bottom drawers can function properly.
Should kitchen plinths have a gap?
The gap should be 150mm maybe a bit more in places if there is a run on the floor. Any appliance that requires ventilation i.e.fridge will state that it requires a vent to be installed in the plinth.
Why do Kitchens have Kickboards?
The wooden kickboards help to lift the cabinets and island to give more depth to the whole room.
How thick should a kick plate be?
3) How thick should my kick plate be? The industry standard plate is 0.05†thick, which is 18 Gauge Stainless Steel or 050 Aluminum.
What is a toe kick in kitchen cabinets?
A toe kick is the recessed space on a lower cabinet that offers room for – you guessed it – your toes. These few inches enable your feet to rest comfortably under a small section of the cabinet, allowing you to get closer to the countertop without having to hunch over.
Should a front door have a kick plate?
Kick plates are not necessary but they are a great feature to protect the surface of the door. It will not only protect the finish of your door from scuff marks and scratches but it gives the door an additional little design touch, just make sure to choose one that complements the design of your door.
Do kick plates go on both sides?
You can install kick plates on both sides of the door if you wish, and enjoy the custom look and protection whether inside or outside.
What’s the difference between a kick plate and a mop plate?
The ONLY difference between Mop Plates, Kick Plates, and Armor Plates is the HEIGHT. Don’t forget we have a standard quantity discount of 10% for quantities of 20 or more.
