Table of Contents
Change oil every 100 hours Most inboard boats will require regular oil changes. Consult your user manual to find out how regular oil changes should be, but a decent guideline to follow would be to do so every 100 hours of engine usage.
Which of the following is recommended as a part of the annual maintenance?
Recommended as part of the annual maintenance for a gasoline powered boat: Examination of thru-hull fittings for signs of leakage or corrosion. A safety precaution that should be taken when fueling a gasoline powered boat: Keep engines and motors turned off.
How do you maintain an inboard outboard motor?
Here are more boat maintenance tips to apply regularly: Replace spark plugs as needed. Regularly check for water in the fuel. Keep an eye on the engine’s oil level. Check the fuel lines for cracks and wear. Check the propeller and engine belts for wear, and replace them as needed. Replace damaged fuel hoses.
What should you always do before starting an inboard engine on a boat?
If you have an inboard gasoline engine, you need to turn on the blower for four full minutes before starting your boat. This very important step is to remove any fumes that could be lingering in the bilge. All portable fuel tanks must be filled off of the boat.
When should you service your boat?
Follow the service schedule outlined in your marine engine owner’s manual. Most outboard, sterndrive and gasoline inboard engines require basic service every 100 hours or annually.
What is recommended as part of the annual maintenance program for gas powered boat?
Changing engine oil, and checking fluid levels are the best way to keep your boat running smoothly.
What is recommended maintenance for a gasoline powered boat?
Replace all engine fluids, oil filters and engine-fuel filters (if not done before winter storage). Inspect and clean spark plugs. Replace per the engine-manufacturer maintenance schedule. Inspect grease fittings, and replace if necessary; add grease.
What is recommended maintenance for an inboard motor?
Change oil every 100 hours Most inboard boats will require regular oil changes. Consult your user manual to find out how regular oil changes should be, but a decent guideline to follow would be to do so every 100 hours of engine usage.
How do you maintain a boat motor?
Regular Maintenance Periodically check the fuel line for cracks and worn spots. Make sure the fuel primer bulb is not cracked and is pliable. Make sure the fuel-line fittings seat properly and don’t leak. Check the clamps on the fuel line for rust or corrosion. Check the fuel tanks for damage and corrosion.
What is an inboard motor on a boat?
Inboard engines are located inside the boat’s hull. Inboard engines are four-stroke automotive engines that have been modified for use on the water. These engines power a drive shaft that is connected to a propeller. Unlike an outboard, an inboard engine does not also steer the boat.
What should you do when fueling an outboard boat with a portable tank quizlet?
Secure the boat to the fueling dock and ensure that the engine has been turned off. Unload any portable fuel tanks and have your passengers step off the boat and onto the dock. This will help keep the boat stable and minimize the likelihood of spills.
Are boats a lot of maintenance?
Boats are not much harder to maintain than your average land vehicle; however, they have many specific needs that most users aren’t aware of. You must realize that a boat quickly depreciates, which means it’s naturally maintenance-intensive. That doesn’t mean it is impossible to keep your watercraft in mint shape.
Which of the following actions is the best to take when fueling an outboard boat with portable tank?
Fueling portable containers Always refill your portable fuel containers on the pavement or dock to ensure a good ground. On the dock, put an absorbent pad under the container. Consider using a funnel. Ensure the nozzle stays in contact with the tank opening.
What are boat trailer ratings based on?
Trailer hitches are rated in four classes according to the weight (GVWR) they will be pulling: Class I has a maximum capacity rating of 2,000 pounds; Class II has a maximum rating of 3,500 pounds; Class III has a maximum capacity rating of 5,000 pounds; and Class IV has a maximum rating of 10,000 pounds.
Which of the following is a requirement for life jackets?
The Requirements for Life Jackets There must be a properly fitting life jacket for each and every person aboard a recreational vessel. Life jackets must be Coast Guard-approved, in serviceable condition and the appropriate size for the intended user. Obviously, they are most effective when worn.
Where is the best place to put PFDs while you are put on your boat?
Personal flotation devices (PFDs) should always be placed on the top deck of the boat. They should always be easily accessible, particularly if an accident should happen. There should be no obstructions, gear, or other equipment covering the PFDs. It is best practice to wear a PFD for the entirety of the boat trip.
What is a type of boat anchor?
Boat anchors come in a variety of types, the most popular being mild steel, high-tensile steel, stainless steel, and aluminum. All steel anchors (except stainless) should be galvanized. Galvanization has a tendency to wear down over time, but an anchor (as well as nearly any other steel product) can be re-galvanized.
Why must you operate the exhaust blower before starting a boats inboard gasoline engine?
If your boat is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine. This will help eliminate fuel vapors in the bilge. Before starting the engine, sniff the bilge and engine compartment for fuel vapors.
Which safety precaution should be taken first by a boat operator?
Which safety precaution should be taken first by a boat operator when boating in stormy weather? The boat operator should first make sure that all passengers on board the boat are wearing US Coast Guard approved life jackets or PFDs (personal flotation devices) when boating in stormy weather. That’s the short answer.
What maintenance is required for outboard motor?
Regular Maintenance Make sure the fuel primer bulb is not cracked and is pliable. Make sure the fuel-line fittings seat properly and don’t leak. Check the clamps on the fuel line for rust or corrosion. Check the fuel tanks for damage and corrosion.
