Table of Contents
What foam board has the highest R-value?
Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation. This type of rigid foam usually comes with a reflective foil facing on both sides, so it can also serve as a radiant barrier.
What is the R-value of 2 foam board?
A wall utilizing STYROFOAM T-MASS Technology with a 2-inch exterior layer and a 4-inch interior layer of concrete along with a 2-inch layer of STYROFOAM extruded polystyrene insulation would result in a material R-value of approximately 11.33.
What is the R-value of 2 inch Styrofoam SM?
STYROFOAM SM Insulation is an extruded polystyrene foam which has an insulation value of R-5 per inch.
Which foam board insulation is best?
Extruded polystyrene (XPS), also known as blueboard, acts as the best insulating foam board for below-grade applications, according to the U.S. Green Building Council. XPS offers greater moisture resistance than EPS, without the need for special films or coating to fend off moisture.
What is the R-value of 4 inch foam board?
This product typically has an R value of 3.6 to 4.0 per inch of thickness.
What is the R-value of 1 rigid foam?
R-values can range from 3.6 to 4.2 per inch.
How thick should foam board insulation be?
Most panels range between 3/8″ and 2.5″ in thickness, though other dimensions and thicknesses are usually available through custom order.
How thick is r30 insulation?
8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.
What is the highest R-value per inch insulation?
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
How thick is r10 rigid insulation?
Standard extruded polystyrene requires a thickness of 2″ to achieve an R-10.
What is the R-value of ISO board?
For the R-value of polyiso wall insulation, a full thickness, 180 day aged value is recommended. Foilfaced polyiso has an R-value of about 6.5 per inch and permeability faced polyiso wall insulation has an R-value of around 6.0 per inch.
What is the best R rating for insulation?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy’s (DOE) ranges for recommended levels of insulation below.
What is the difference between pink and blue foam board?
Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.
What is the R-value of Dow blue board?
Dow STYROFOAM™ Scoreboard Insulation Board (Blue Board) 4 ft by 8 ft Sheet, 1″ Thick, R value 5.0 A nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS).
What is the R-value for foam insulation?
The R-value of closed-cell foam is R-6.5-7 per inch. Contractors often use it to insulate under slabs, ceilings, walls, and roofs. It performs better than other insulation types. It provides an excellent air barrier, resists moisture, and retards vapor.
How thick is R38 rigid insulation?
Easy to handle and pre-fabricated batts with a thickness or depth of 11.25″ will be needed to attain an R-value of R38. It is used in floors of crawlspaces and attics, supplying water-resistant insulation with no forming of mildew, fungi, or mold.
What is the R-value of 2 inch Blueboard insulation?
DOW BLUE BOARD 2″ 2’X8′ 250 PSI R-VALUE=10.8.
Does foam board insulation need a vapor barrier?
Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.
Which side of foam board insulation faces out?
If you’re wondering whether to put the foil side of foam insulation board shiny side in or out, consider whether you want to make the space inside warmer or cooler. If you want to make the space warmer, the foil should face inside so it can reflect radiant heat back into the room.
Which is better EPS or XPS?
XPS, at about R-5 per 25 mm, has only a slightly better thermal performance than EPS. However, EPS with the same level of density is less expensive. XPS is usually avoided in areas where materials with less density are needed or where the material, which is not produced below a certain density, is not applicable.
Is R30 insulation better than R19?
Insulation in your walls and ceilings slows down this heat transfer. The bigger the R value, the better the insulation is at slowing down the heat transfer. So R19 is better insulation than R13, and R30 is better than R19. The larger the R value, the better the insulation value.
How thick should spray foam be?
Now generically speaking, we usually recommend open cell spray foam to be 6- to 10-inches on a roof deck or ceiling and 3-inches in the walls. Closed cell spray foam should be 4- to 5- inches on the ceiling and 2- to 3-inches in the walls.
What kind of insulation do you use for a cathedral ceiling?
Most home contractors would probably tell you that the best insulation to use for a vaulted ceiling is fiberglass insulation. The main reasons are that fiberglass is one of the most inexpensive types of insulation that you can purchase, and fiberglass batts are relatively easy to install in vaulted ceilings.
What is the R-value of 18 inches of insulation?
Warm Climates (R-30 to R-49): Fiberglass (blown): 14” – 18” Fiberglass (batts): 11” – 14”.
What is the thinnest most effective insulation?
Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).
