Table of Contents
Turn the gas knob to “Pilot,” press and hold it down. This will start the flow of gas so you can light the flame. Some water heaters have a separate button for pilot mode, usually a red one, which you’ll press and hold. While still holding the gas down, light that pilot.
Do propane water heaters have a pilot light?
Gas and propane fueled water heaters use a small flame to ignite the burner. This small flame is called a pilot light and it stays lit at all times. When the water heater needs to heat the water within the tank, it ignites the gas burner with the help of the pilot light.
Should the water heater be on pilot or on?
You should set the water heater to “pilot”. If, however, your water heater is also the boiler for your central heating, then you’ll want to leave the heating running as normal so that your house doesn’t get damp as a result of cold and condensation.
How do I tell if my water heater is gas or electric?
Start by looking for an access panel on the side of the water heater. If you remove it and see a blue flame, that’s a pilot light, which only gas models have. Connected pipes are also indicators of gas, while an electric water heater will simply have a cord going into the top or side of the unit.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do you turn on a pilot light?
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Do all water heaters have a pilot light?
* Caution: Most modern water heaters no longer use standing pilots. They use electronic ignition to ignite the gas. Do not attempt to manually light an electronic ignition system.
How do I know if my pilot light is out?
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.
How do you light a hot water heater without an igniter?
Lighting with No Igniter Take a long lighter to reach the pilot. Remove the plate attached below the dial box. Switch Pilot to OFF. Wait for a while, – 5-10 minutes until there won’t be any gas. Change the temperature to LOW, and switch to Pilot. Push ON/OFF dial down, and simultaneously use the lighter.
How does a gas water heater igniter work?
Piezo igniters are designed to generate electric sparks and ignite the gas. Standard piezo igniters found in today’s water heaters are push-button type and are built into the gas control valve. They do not require an electrical connection to operate.
How do I know if my pilot light is out on my water heater?
It’s usually right on the panel. Turn and hold the knob to “Pilot” and push the ignitor. You should hear it click, and probably also a “whooshing” sound. Check in that gap, and you should see the light on.
Is it safe to light water heater pilot light?
Most homeowners can relight a pilot light themselves without any issue, but it’s important to be safe when dealing with a gas-powered hot water heater. You should always proceed with care when relighting a pilot light, since the gas used to power your hot water heater is flammable and potentially dangerous.
Will my gas water heater work without electricity?
Gas water heaters utilize a continuously running pilot light and should work in a power outage. Electric is hooked up to the gas water heater in order to create the spark for the pilot light to activate. However, once the pilot light is lit, it will continue to burn.
Why is my gas hot water heater not working?
If a gas water heater isn’t heating, a common problem is usually that the pilot light has gone out. This may be caused by the gas valve, the natural gas supply, or—more likely—the thermocouple located next to the pilot light.
How do I know if my water heater is working?
7 Tell-tale signs of a Water Heater not working You don’t have enough hot water. You have varying water temperature issues. You have a leaking water heater. You notice reduced water flow. You’re hearing some concerning sounds. You have smelly or discolored water. Your water heater is on the older end of the spectrum.
What causes a water heater pilot to go out?
Your thermocouple senses when your pilot light is burning. If it senses that your water heater pilot light keeps going out, the thermocouple will shift off the gas supply to the heater. Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame.
