Table of Contents
A plumbing auger or plumbing snake is a long, flexible metal cable with a small, uncoiled spring on one end and a handle on the other. The auger head on the snake looks like a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it.
What can I use instead of a plumbing snake?
If you don’t have a drain snake at your home, you can use a pipe cleaner, a straightened clothes hanger, or make this simple tool out of a plastic bottle: Start with an empty 2-liter plastic bottle.
How do you use a plumbing snake?
The basic process is as follows: Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. Keep pushing more of the snake into the drain until you feel resistance. Rotate the snake against the blockage until you feel it feed freely into the pipe.
Can I snake my own drain?
For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.
How much does a snake for a drain cost?
The average plumber cost to snake a drain is $100 to $275 for a toilet, sink, tub, shower, or laundry drain. The average cost to snake a main line is $150 to $500. Roto-Rooter prices are $225 to $500 on average to snake a drain.Cost To Snake A Drain. Type Average Cost Severe Clog Requiring Hydro Jetting $250 – $800.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
How do you unclog a sewer line without a snake?
How to Unclog a Main Sewer Line Without a Snake Step 1 – Run Hot Water. Step 2 – Use a Chemical Drain Cleaner. Step 3 – Apply the Plunger. Another Way – High-Pressure Water. If Water Goes Through It Or To It, We Do It!.
Can’t get the snake down the drain?
Too much force – When you’re trying to dislodge a blockage, it can be tempting to try and force a snake cable through the drain too fast. If you force it, sometimes the cable can bend back on itself or kink. Instead of forcing the cable, extend the snake cable a few inches at a time until you reach the clog.
How do you get a snake past the P trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
Can a drain snake break a PVC pipe?
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
How do you unclog a sewer drain?
Mix 1/3 of a cup of vinegar with 1/3 of a cup of baking soda and pour the fizzy mixture into the clogged sewer drain immediately. If you don’t know how to unclog main sewer line, take advantage of vinegar to eliminate the grime, grease, and hair in the pipe. Flush the pipe with hot water after one hour.
Does Liquid plumber damage pipes?
Liquid Plumr and Drano are chemically designed to eat away at whatever is clogging your pipes, which can result in damaging plastic or even metal pipes. In most cases, a single use of Liquid Plumr or Drano will not cause any issues with your pipes, though you should avoid using them in your toilet.
When should you call a plumber for a clogged drain?
If you have more than one drain in your home that is backing up or there is a scent of sewage in the air, it’s time to call the plumber out to snake your drain line as soon as possible. If you have tried the plunger and it isn’t clearing the drain with vigorous plunging, you will need a plumber.
How do you tell if your sewer vent pipe is clogged?
How to Tell if Your Plumbing Vent is Clogged A Primer on Plumbing Vents. Water Takes A Long Time to Drain. Dry and Empty Toilet Tanks. Foul Smells. Gurgling or “Glugging” Sounds as Water Goes Down the Drain. Get Those Clogs Out of Your Plumbing Vent ASAP.
Can Drano damage pipes?
Drano® will not damage pipes or plumbing. Drano® products are powerful enough to dissolve nasty clogs, but they will not harm your plastic or metal pipes, so there’s no need to worry. All Drano® products are safe and can be used with plastic pipes or metal pipes.
Can a plumbing snake go down a toilet?
To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.
Will a plumbing snake go through a toilet?
A drain toilet snake is a long wire coil with a corkscrew-like tip that you feed into your pipes until it encounters the clog. Even the least expensive toilet snake will clear a toilet. A toilet snake can also be used on clogged bathroom sinks.
