Table of Contents
Can I replace garage door spring myself?
So faced with a broken garage door spring, the question is, can you fix it yourself? You absolutely can replace a garage door spring, but the type of springs you have may influence your decision. If you’re uncomfortable with any part of the process, simply leave the job to a garage door professional.
How much does it cost to replace a torsion spring on garage door?
Replacement torsion springs cost $30 to $100 each, and replacing them will cost $75 to $150 per spring, including labor and materials. Top-rated garage door repair experts are here to help.
Is it hard to replace a garage door spring?
How to Replace Extension Springs. Extension springs are generally considered much easier to replace. You can completely remove and replace the springs on your door without dealing with any amount of dangerous tension. Once you open the door, the springs will lose most of their tension and should be safe to work with.
How long does it take to replace garage door springs?
Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.
Can you manually open a garage door with a broken torsion spring?
As professionals in the industry, we advise you do not attempt to open your garage door if the spring is broken. Extension springs on either side of the door, along the rails, help counterbalance the weight of the door as it is raised or lowered. Torsion springs across the top of the door help do the heavy lifting.
What is the color code on garage door springs?
Garage Door Extension Spring DASMA Color Code Chart Color Pounds Kilograms Brown 60/160/260 xxx Orange 70/170/270 30/75/120 Gold 80/180/280 35/80/125 Light Blue 90/190/290 40/85/130.
What causes torsion springs to break?
The springs on your garage door system are responsible for the heavy lifting. When the garage door is lowered, the springs gain tension. When raising the garage door, tension is released and the spring assists with the lifting. As a result, most garage door springs break when the door is down.
What size torsion springs do I need?
Measure the length of ten or twenty coils of the spring that needs to be replaced, using inches.Step 2: Measure the Wire Size. Length of 10 coils (in Inches) Length of 20 Coils (in Inches) Wire Size 1 1/4 2 1/2 .125 1 3/8 2 3/4 .135 1 7/16 2 7/8 .142 1 1/2 3 .148.
How long do garage torsion springs last?
Average Life Expectancy The average home opens and closes a garage door four times daily, and, with a 10,000-cycle torsion spring, this translates to a lifespan of approximately seven years. Thus, high-cycle springs can have lifespans that last from 14 to 20 years.
Should you replace both garage door springs at the same time?
When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.
How many turns on a garage door torsion spring?
A rule of thumb with springs is that four quarter turns equals a full revolution and the spring needs to be tightened a full revolution for every foot of door height (e.g. 7-1/2 foot door = 7 revolutions +2 (30 quarter turns).
How much are springs for a garage door?
Replacing garage door springs costs $150 to $350 on average. The springs alone typically run $30 to $75 each but you may find them as low as $15 a piece and up to $100 each. Commercial grade springs can run $300 or more.
Do all garage doors have springs?
As a rule of thumb, a single garage door takes one torsion spring. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs. If you have just one, it will be only on one side of the center bearing plate.
Which is better torsion or extension springs?
Torsion springs tend to be stronger and more durable than extension springs. And though they are more expensive, they last longer, between 15,000 and 20,000 cycles as opposed to 10,000 cycles with extension springs. They also offer greater balance and show more control when moving, not jerking as the door moves.
Can a garage door work without springs?
Garage doors use springs to counter balance the weight of the door and make them easy and safe to lift. Your garage door simply won’t work if it doesn’t have springs or the springs are broken. The other type of spring style is a typically much older style system called extension springs.
How do you close a garage door with a broken spring?
Lift the door until it is completely raised along the horizontal rails. If the door is too heavy, discontinue your attempt to lift the door and call a repair service immediately. Some companies, like ours, are able to provide same-day repair services. To close the door, carefully pull the door down slowly.
What happens if you put the wrong spring on a garage door?
When torsion springs are sized incorrectly, they can lead to safety issues. The garage door will not work as it should, and that could lead it to malfunction and potentially endanger users.
What are the different colors on torsion springs?
Torsion springs will generally have two different colors. First, each spring will be marked with red or black. Red springs are ‘right-wound springs’ while black springs are ‘left-wound springs’. The other color on the torsion spring is the DASMA color.
