Table of Contents
Half-inch cement backer board is ideal for most tiling jobs, including walls, floors, countertops, and ceilings. For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board.
Can you use 1/4 inch cement board on floors?
1/4″ USG Durock® cement board is an ideal substrate for floor and countertop ceramic tile installations. The 1/4″ thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials.
What is the minimum thickness of cement board when tiling floors?
Floors: A 1/4-inch minimum thickness is needed, but thicker panels are also fine. Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.
Can you use 1/2 inch cement board on floors?
Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. Manufacturers also recommend bonding cement board to floors with a 1/4-inch polymer-modified thinset coating.
Is cement board needed for floor tile?
Whenever you’re laying tile on a wood subfloor, you need to first install cement backer board. Backer board prevents leaks and water damage that could harm your flooring and the structure of your home.
How thick is backer board for floor tile?
Cement-fiber, or similarly reinforced, backer board comes in standard 1/4 inch and 1/2 inch thicknesses. If you’re installing backer board over an existing subfloor, 1/4 inch is sufficient. If you’re installing backer board in new construction, attaching it directly to floor joists, opt for 1/2 inch sheets.
Can I just screw down cement board?
Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on the floor. It is important to highlight that screws shall not be installed all the way down to the floor joists.
Do I really need thinset under backer board?
Using thinset under cement board is a commonly skipped step amongst many contractors. However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used.
What thickness Hardibacker should I use?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition. On existing structures: Ensure subfloor is not damaged. Replace any loose, warped, uneven or damaged sections of floor.
How thick should tile mortar be?
Most tile installations require a 3/16-inch layer of mortar beneath the tile. A mortar layer 3/16 an inch thick is accomplished by spreading mortar with a 3/8-inch by 3/8-inch square-notched trowel. This thickness is ideal for most tile installations.
What is the size of cement board?
Cement board, technically called cementitious backer unit (CBU), is manufactured under different brand names. The standard size sheet is 3 x 5 ft. and 1/2 in. thick, weighs 45 to 60 lbs.
What is the difference between durock and Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
What kind of thinset goes under cement board?
An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. Tara, The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.
How do you install cement board on floor tiles?
Instructions Apply the Mortar Bed. Mix a batch thinset mortar, following the manufacturer’s directions, using a bucket and margin trowel or putty knife. Place the First Cement Board Sheet. Fasten the First Sheet. Install More Sheets. Trim the Last Panel. Apply Joint Tape. Mud the Taped Joints.
What is the difference between backer board and cement board?
Cement backer board is also called cement board, and it’s the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.
What do you do with a gap between tub and cement board?
Technically, after the tile is installed over the backer board that gap between it and the tub ledge should be filled with an ASTM C920 sealant (caulking e.g. silicone). Although some say you should have weep holes along this gap so any water behind can weep out into the tub.
What is the thinnest backer board for tile?
Fiber cement board is available in 1/4-inch and 1/2-inch thicknesses. The 1/4-inch-thick board is typically used on floors and countertops.
What do you cut cement board with?
First, you’ll want to choose a scoring tool. A carbide-tipped scoring knife is recommended, but you can also use a utility knife or shears. Never use a high-speed grinder to cut cement board indoors, since this can create a dust hazard.
How long before you can walk on cement board?
However, after you mount the backer board to the floor you simply have to seal the seams with mortar and wait until the mortar dries. This is normally 12 hours but may be up to 24 hours in some cases.
How do you thinset cement board?
Spread thinset over the screw depressions across the backer boards, leveling them. Let the seams and screw depressions dry overnight. Apply another layer of thinset over the seams and screw depressions, and blend the material out in all directions with the trowel.
