Table of Contents
Overall, our experts at Patio Productions recommend Cedar or Redwood as the best wood choice for outdoor decks. If you’re looking for a cheaper option, pressure treated wood is your next best option.
What is the most durable decking material?
Aluminum decking is the most expensive out of the deck material and will last the longest with a lifespan of 30+ years. Steel decking can have a lifespan of 60+ years when correctly installed by a professional builder.
Should you use pressure treated wood for a deck?
Pressure-treated lumber is the logical choice for the structural part of your deck—the posts, joists, beams and other members you normally don’t see. Pressure-treated lumber can support more weight and span longer distances than cedar, redwood or other woods commonly used for building decks.
What material should I use for a deck?
Pressure treated lumber can give you many years of use and enjoyment of your deck. Often made from southern pine, a wood variety known for its load-bearing strength and durability, pressure treated materials can be the best wood for decking in high-traffic spaces.
Which lasts longer cedar or pressure treated wood?
Cedar is stronger and more durable than pressure-treated lumber. Pressure-treated lumber can warp and weather within a few years if left untreated, while cedar is more capable of naturally keeping its shape.
How long will a pressure treated deck last?
It depends on the climate, the type of wood, its uses, and how well it’s maintained. While pressure treated poles can stay up to 40 years without any signs of rot or decay, decks and flooring might only last around 10 years.
What is better #1 or #2 lumber?
#1 Grade: When appearance becomes more of a factor, #1 Grade will contain smaller, fewer, sound, tight knots and have less wane than found in #2 Grade. While it can have wane similar to that found in #1 Grade, it has tighter growth rings and contains smaller and fewer knots.
Is cedar or pressure treated wood better for decks?
When it comes to comparing treated wood vs. cedar, pressure-treated wood is the sturdier and more weather-proof of the two. It’s highly resistant to insect attack and rot, and special versions rated for “ground contact” can be buried in soil and will continue to shrug off decay for decades.
What size wood do you use for a deck?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface. Cedar 1x lumber usually has one rough side and one smooth side.
Is cedar decking worth the money?
It’s a durable wood that is naturally resistant to rot, decay and insect attacks, and resists moisture absorption, so it tends to last longer, needs less maintenance, and doesn’t warp or split as easily. A cedar deck can last for 15-20 years or more, depending on maintenance and environment.
What are the disadvantages of cedar wood?
Cedar Disadvantage Requires Maintenance. Due to being softwood, cedar needs regular maintenance. Flammable. Cedar is a flammable wood. Fading Color. Changes color over time due to chemical reactions. Sensitive. Cedar is a sensitive wood. Weak. Cedar is a common material in construction.
Is pine Good for decking?
Both pine and standard “white wood” lumber work well for deck construction. Some pines are nearly as resistant to rot as cedar, and both of these options take paint well. Paint will increase the longevity of a pine deck to some extent, but cannot give the same results as cedar, redwood or treated lumber.
Can you leave decking untreated?
What is the condition of your decking? This helps to make sure that any existing treatment has eroded, allowing the new paint or stain to properly sink in and stick to the deck. If it’s untreated, over six months old or previously stained or painted, you can start your restoration project.
Is painting a deck better than staining?
While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.
Why is my wood deck cracking?
Cracks: Fill and seal. Although cracking on a deck isn’t attractive, it’s usually just a normal sign of aging. If the cracks are less than six inches long, all you need to do is fill them in with latex wood filler and then finish off the deck with sealant.
What is the difference between standard and premium lumber?
Some types of lumber may be marked as “premium” by the manufacturer, but this is not a standard grade. “Premium” refers to the clean appearance of the board but doesn’t verify the strength or physical quality.
What is the best grade of pressure treated lumber?
The best pressure treated wood for decks is Select, #1 or #2 grade wood. Within all grades, there are planks that will be freer of blemishes and knots and may be called premium. Decking materials such as 2×6 and 5/4×6 frequently are of better-looking #1 and #2 lumber.
What is DSS lumber?
*Dense Select Structural. Select Structural. *Select Structural Non-Dense. High quality, limited in characteristics that affect strength or stiffness. Recommended for uses where high strength, stiffness and good appearance are desired.
