Table of Contents
Choose an oil with the vehicle manufacture’s recommended viscosity rating (check your owner’s manual). Viscosity is an oil’s ability to flow at different temperatures. The two most common viscosities (a.k.a. weights) are SAE 5W-30 and SAE 10W-30. The lower the number, the thinner the oil.
Should I use 5w30 or 5w40?
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Does it matter what grade of oil I put in my car?
As long as the grade and ACEA specification is correct, you should be fine. However, David Wright of the United Kingdom Lubricant Association recommends choosing reputable manufacturers. Some firms will blend more advanced, expensive oils that exceed the specifications on the packaging.
Can we use 5w40 instead of 5w30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
What’s the difference between 5W 20 and 5W-30?
5w30 motor oil, the 20 indicates that the oil has a lower viscosity and is thinner at higher temperatures. So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures.
What is 5w40 oil used for?
5w40 is a motor oil that helps the engine to work smoothly and the moving parts from overheat because of friction. 5w40 transfer heat from the combustion cycle and assist to keep the engine clean by burning by-product and protects the engine from oxidation.
Can I use 10w40 instead of 5w40?
Can I Use 10w-40 Instead Of 5w40? If you need a 10w-40, you can use 5w-40. Both oils are equivalent at operating temperatures of 40Wt. The second number is the operating temp viscosity (the number that matters most).
Does type of oil really matter?
The most important thing is to use oil that’s the right thickness, or viscosity, for your car’s engine. Oil that’s too thick or thin won’t provide the necessary protection for your engine, which can result in costly damage. The standards required for your car will also be listed in your owner’s manual.
What happens if I put the wrong oil in my car?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
What oil is best for cars?
Our Top Picks for Motor Oil Best Oil for Most Cars: Mobil 1 Synthetic Motor Oil. Best Synthetic Oil on a Budget: AmazonBasics Full Synthetic Motor Oil. Best High-Mileage Oil: Valvoline High Mileage Max Life. Best Conventional Oil: Valvoline Daily Protection.
Can you use 10w40 instead of 5w30?
Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Is 5w40 good for hot weather?
40 weight oil is usually “good enough” for a hot climate, but there is hot and there is really HOT. And multi-viscosity oils does not stay multi-viscosity over its usual service life. So “You risk engine failure, and it is your fault, if that is not what your car’s manual says to use, or use for your climate.”.
Is 5w40 better for high mileage cars?
According to Mobil Oil’s website, a heavy grade 5W-40 oil is best for use in vehicles that hold a diesel motor with high mileage. The use of heavy grade 5W-40 oils help to extend the life of diesel engines by protecting the engine against leaks, Z.
Is it OK to run 5W20 instead of 5w30?
5W-20 oil, being the lower viscosity oil (thinner oil) than 5W-30, might help boost your fuel economy. And although you may not notice a vast difference, it does add up over time. However, remember that you should always use the motor oil recommended for your car by your engine manufacturer or mechanic.
Is 5W20 good for summer?
5W20 yeah it is like water, good for winter, but not as good in summer, when it gets 110F. Although 5w20 is like water, but it is holding together.
Can you put 5W20 in a car that takes 5W-30?
It is not safe to use 5w20 instead of 5w30. 5W20 is thinner and made for colder temperature. If you use 5w20 in warmer temperature instead of 5w30, you may have to deal with more friction and faster engine wear. Eventually your engine performance and longevity will be affected.
Is 0w40 better than 5W-40?
0w40 will have better flow characterizes in cold and usually sheer a bit in the heat down to a 30 weight oil. 5w40 will be a thicker oil that will maintain viscosity in the heat better.
What is the difference between C2 and C3 oil?
If you have a modern turbodiesel car with a DPF, you must use a low saps engine oil classified by ACEA as C Class. C3: Again, Mid SAPS-Level, the main difference between C2 & C3 engine oils are C3’s are designed to be capable of using oils with a minimum HTHS Viscosity of 3.5 mPa*s.
Is 5W-40 fully synthetic?
Full synthetic 5W-40 motor oil is formulated to flow like 5 Weight oil from a cold start in winter temperatures and like 40 Weight oil once the engine has reached its normal operating temperature. Castrol® EDGE® is an advanced full synthetic 5W-40 motor oil.
