Table of Contents
Can I replace sway bar links myself?
Replacing the sway bar links is a repair process that can be done with a few basic tools. If you don’t have access to the correct tools or are short on time, ask a certified mechanic from YourMechanic to replace the sway bar links for you.
Can you replace one stabilizer link?
Is it necessary to replace both sway bar links if only one is bad? The answer is no, however your mechanic may recommend replacing both sway bar links because both links usually wear at the same rate and if one is bad, the other may go soon too.
How much does it cost to change stabilizer links?
The average sway bar link replacement cost is usually between $125 to $160 including labor. The links themselves cost between $40 to $110 each, while the labor will set you back anywhere between $50 to $70.
When should stabilizer links be replaced?
Now, when it comes to the overall lifespan of the sway bar link, it will be from four to five years. However, if the roads have treated the car exceptionally well and the turns were not that sharp, you can expect them to last over five years.
What happens if your stabilizer link breaks?
Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds.
Is a sway bar link the same as a stabilizer link?
The stabilizer and sway bars go by different names. You might know them by stabilizer link, anti-roll, and anti-sway bars. No matter what you know them by, they are basically the same thing.
Should stabilizer links be replaced in pairs?
Some sway bar links have ball joints and studs, while others are basically a long bolt with a sleeve and bushings. Most professionals recommend replacing sway bar links in pairs (i.e., both front links or both rear links).
Can you drive with broken sway bar link?
If you suspect that a sway bar is broken, you can still drive the car, but you must use caution. It will feel “looser”, particularly when driving at high speeds. It’s very possible that this will cause you to lose control of the car, resulting in a serious accident if you’re not prepared for it.
What is the purpose of stabilizer link?
A link stabilizer, otherwise known as a sway bar, anti-roll bar or even stabilizer link, connects the vehicles left and right wheels through short links, reducing body roll whilst cornering, and absorbing shocks from potholes and uneven road surfaces. Fitting a strong, durable part is therefore a must.
How long does it take to replace a sway bar?
Bushings should take maybe 30-40 minutes to change (in pairs) front and rear.
How do I know if my sway bar links are bad?
Warning signs of a broken or bad sway bar link include clunks and squeaks. Over-steering or excessive lean through turns are also symptoms of worn sway bar links, but they can also be signs of larger problems with your vehicle’s suspension system.
Can you drive a car without a stabilizer bar?
Vehicles can be driven safely without a sway bar or with it disconnected. The vehicle does feel different while cornering but is not “uncontrollable”. Just take corners at legal posted speeds or lower and be careful changing lanes on the highway.
Can a broken sway bar affect alignment?
Sway bar end links, or anything to do with a sway bar, won’t affect wheel alignment settings.
How does a sway bar get damaged?
Because the sway bar itself is a torsional swing, the sway bar link smooths the motion transfer between the sway bar and the control arm. Like many automotive parts, over time the sway bar links will wear out. Water intrusion that leads to rust, age, and lack of lubrication all contribute to deterioration over time.
Can sway bar links cause loose steering?
Since the stabilizer bar links are attached to the lower control arm, steering and handling are also negatively impacted when they begin to wear out. The steering wheel will appear to be “loose”, and the body will sway from left to right more due to the fact that the stabilizer bar links and bushings are wearing out.
How do you tighten a sway bar link?
Tighten the sway bar link nut using a combination wrench to hold the bolt head and a torque wrench and socket to tighten the nut. Use caution when tightening the link: it only requires light torque, typically 10 to 20 foot-pounds.
Can you reuse sway bar links?
Yes. These are on condition components. So long as the other one is in perfect condition (I’m not talking about dirt) carefully check the rubber seals and or bushings. With a tool such as a pry bar, carefully check the end joints for any play by trying to lift up or push down the anti roll /sway bar.
