Table of Contents
How do I choose a circular saw blade?
Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What are the four types of saw blades used with circular saws?
Generally speaking there are four major categories of circular saw blades. They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What saw blade makes the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are an excellent choice for finish carpentry and other applications that require precision and a smooth finish.
How many teeth should my circular saw blade have?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout. MDF requires even more teeth (90 to 120) to get the cleanest cut.
What size of circular saw blade do I need?
Handheld circular saws accept smaller blades, those 4-1/2 inches to 7-1/4 inches in diameter. These are typically carbide-tipped. Tile saws use 7-inch or 10-inch diamond blades. Table saws and compound miter saws use blades 10 inches or 12 inches in diameter.
What size circular saw will cut a 4×4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
Can I use any circular saw blade?
What is this? Not every circular saw is adequate for each material, which means that the blades are made according to whether you need them to cut wood, metal or concrete. Along with that, it is a fact that a single circular saw may need different special blades that aren’t universal or interchangeable.
Can you use different size blades on circular saws?
Short answer: Within reason, you can. Long answer: For safety reasons the blade gap should not be larger than 1/8″ (3 mm). If you do not care about workplace safety, you can use smaller circular saw blades in most cases.
Can I use a smaller diameter blade on my circular saw?
While you can certainly use a smaller blade in a circular saw – as long as you keep it within reason, you might also be wondering if you can use a bigger blade in a circular saw. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
Are Diablo and Freud the same?
Freud and Diablo Background The Freud Group is a global supplier of circular-saw blades, router bits, and cutters for enthusiast woodworkers, professional and industrial users. They produce under both the Freud and Diablo brands.
Are Diablo blades worth it?
The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws. These blades were used and tested with a Dewalt DW745 table saw, and a Makita LS1016L sliding compound miter saw.
What makes a good circular saw blade?
The number of teeth a circular saw blade has played a major role in your choice of one. Blades that have more teeth tend to provide a cleaner and smoother cut, whereas those with fewer teeth would have a rougher finish. The 24-tooth blade is good enough for you if the diameter is 7¼”.
What is the difference between a circular saw blade and a Mitre saw blade?
The Main Differences Between Miter Saws vs Circular Saws are: Miter Saws can cut more precisely, whereas Circular Saws have a handheld nature that allows the user to cut in a variety of angles and cuts. Miter Saws are quicker, whereas Circular Saws are generally less expensive.
How do I know if my circular saw blade is dull?
How Do I Know When a Circular Saw Blade is Dull? The blade will cut slower than usual or may completely bind mid-cut; The blade will create more tears or chipping than usual; The blade will produce burn marks on the wood and may start smoking.
