Table of Contents
Are concrete fence posts easy to remove?
It’s probably 18-24″ in the ground and set in concrete. If you do need to remove it, dig down one side of it with a narrow spade (or better still a trenching tool) and lever it into the hole you’ve just made – sufficient to loosen it enough to remove. It will be heavy – try to set up some form of lever to lift it out.
How do you break concrete posts?
The biggest sledge hammer you’ve got is generally the answer. If you can start of some cracks with a chisel that can help, also digging out one side so it is half supported will encourage it to break up. Other than that just keep hitting it. You’ll struggle without a big tool.
Can you cut through concrete fence posts?
You can, with care cut them at angle with a TS400 and good diamond blade. Paint the tops with bitumen paint or similar otherwise the rebar will corode and the concrete spall.
Can I cut concrete fence posts?
Concrete posts can be cut to desired length using a masonary disc on an 5 inch angle grinder. However, sometimes it is necessary to cut the length of the posts to fit in with tree roots or obstructions in the ground on a fence line. The posts can be cut using an angle grinder with a masonary disc.
What tool do I need to break up concrete?
Jackhammer. If you have a massive slab of concrete that is thicker than a few inches, working with a jackhammer is your best bet. The tool can break up the material by using a high-powered pointed chisel. You can decide which type of jackhammer suits your application based on its abilities, availability and price.
How do you cut reinforced concrete posts?
Support the post & give a good belt with a lump hammer, should enough to reveal the rebar so you can cut it with your grinder, most likely only two lengths of rebar per post. Best thing to cut them is a Stihl saw or 9″ grinder, can hire for a day or weekend. Monkey Chops likes this.
Does capping fence posts prevent rot?
By using a fence post cap most issues caused to fence posts by the weather can be resolved as a post caps protects the post from weathering. By opting to include a post cap, you are also extending the life of your fencing, making it safer.
Can you cut concrete with a grinder?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
How do you cut vertical fence posts?
All you need to cut the posts to an even height is a circular saw. Using a circular saw rather than a manual saw or any other type of saw will give you greater control, ensuring that you’ll have a clean cut rather than a rough one.
Can you cut down concrete gravel boards?
Cut the boards to size with an angle grinder fitted with a diamond disk. Make sure you have a diamond-studded blade or another disk that works on concrete. To use the angle grinder, hold onto it with both hands and move it slowly along the board. Cut across the boards first to trim them to the proper length.
Can you reuse fence posts with concrete?
Pulling up an existing fence post to reuse can be quite a task. Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
How hard is it to remove concrete?
Demolishing concrete may seem like a daunting, expensive task but depending on the size and thickness of your slab, you might be able to tackle the project on your own. According to Yuka Kato at Fixr, the cost to have a professional remove a concrete slab varies based on the size and materials it contains.
How much does it cost to remove concrete UK?
The general rule of £50 per metre square also applies to concrete driveways. Total concrete driveway removal costs tend to sit between £1,500 and £2,500. But of course, prices can increase if the driveway is larger than average or requires specialist equipment.
Is it hard to break up concrete?
Breaking up concrete is highly strenuous work. Take frequent breaks and keep yourself well-hydrated. To break off large pieces, make a series of blows in a line to create a stress crack, then strike in the middle of the area you want to remove to break the concrete along the line.
What is a concrete chisel?
Concrete chisels are commonly used to make precision cuts through concrete. These chisels typically feature a handle and a strong bevelled edge blade which will cut through concrete with the application of force from a hammer or mallet.
Can you break concrete with a sledgehammer?
When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.
Can you use a hammer drill to break up concrete?
A hammer drill is perfect for light masonry. It works best at drilling holes in bricks, mortar and concrete blocks. But it can also handle the occasional hole in poured concrete.
