Table of Contents
What is wrong with my Maytag washer?
Some common Maytag front-load washer problems include not agitating or spinning, and not draining or filling with water. Perhaps your washing machine is vibrating during spin cycles or making noises during wash cycles. Look, Maytag is a great brand, but if the washer isn’t working that doesn’t work for anybody.
Why is my Maytag washer not draining or spinning?
A top load Maytag washer not draining may have a defective lid switch assembly. On top-loading washers, draining and spinning will only occur if the lid is properly closed and activates the switch. Try depressing the lid switch with your finger to see if the machine drains and spins.
Why is my Maytag washer not starting?
When your Maytag washer turns on but won’t start there may be a problem with the door closure. Check the door for trapped clothing that may prevent it from closing completely. If no obstructions are visible, that latch that secures the door and signals the washer to start may be defective.
How do you diagnose a washing machine problem?
Washer Troubleshooting Guide Check that the washer is plugged in securely. Check the circuit breaker or fuse box. Test the outlet for current. Check that the water supply valves are turned on. Inspect the filter screens. Test for overheating. Test the water level switch. Test the timer control.
Is it worth repairing a washing machine?
A relatively new washer may not break down regularly, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. Washing machine repair is recommended when the repair cost is less than 50 percent of a new machine’s price.
What’s wrong with a washer when it won’t spin?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
How do you reset the sensor on a Maytag washer?
The easiest way to reset a Maytag washer is to disconnect the power to the washing machine for three minutes. Disconnecting the power allows the electrical charge to dissipate from the washing machine, which allows it to reset. If the reset fails, unplug the washer again, this time leaving it unplugged for ten minutes.
Where is the coin trap on a Maytag top load washer?
Inside the center agitator: If you have a top-loading washer, inspect the center agitator. The cover may be removable, revealing a lint trap inside. At the end of the drainage hose: A small mesh screen may be fitted onto the end of the hose that drains water out of the machine.
How many years should a washing machine last?
How long does a washing machine last? A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren.
Why would my washing machine just stopped working?
The number one reason why your washer suddenly stops working is that it has no power. That will stop it from running pretty quickly, and is more likely to be the case if your washer stops partway through a cycle. The plug might just be loose in the wall, so look closely and push the plugin firmly just to be sure.
What causes a washing machine to stop working?
There are a few possible reasons for this: – The locking mechanism could have jammed (maybe some clothes have gotten in the way). – There could be a glitch in the washer’s computer. – The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.
How many years does a Maytag washer last?
A new washing machine has an average life expectancy of 11 years. Consumer Reports does not recommend replacing any appliance that is more than eight years old if it is a high-end model.
Is it worth fixing a 6 year old washing machine?
As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.
How do I know if the motor has gone on my washing machine?
If the machine is filling and emptying as normal but the drum isn’t turning, or if it’s making some sort of spluttering noise, or if you can see sparking coming from underneath the front of the machine these are all likely to be caused by worn brushes and you’ll need to replace them.
What does FS mean on Maytag washer?
What could that mean? The Maytag washer code F5 is an alert that tells you the lid can’t lock. There could be some clothing or other obstruction in the lid preventing it from locking. This is one of the simplest problems to fix.
Why does my Maytag washer stay on sensing?
If your Maytag washer’s sensing light is stuck and will not move to the appropriate cycles, this is usually caused by a stuck or keypad. The keypad can occasionally become jammed or, if you have recently replaced a part on the washer, you may have forgotten to recycle the codes, which can lead to a stuck sensor light.
