Table of Contents
How do I know what engine oil to use?
Choose an oil with the vehicle manufacture’s recommended viscosity rating (check your owner’s manual). Viscosity is an oil’s ability to flow at different temperatures. The two most common viscosities (a.k.a. weights) are SAE 5W-30 and SAE 10W-30. The lower the number, the thinner the oil.
Should I use 5W-30 or 5w40?
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Does it matter what engine oil I use?
Using the wrong oil will put undue stress on the mechanical components of your engine. Badly lubricated parts will wear faster and so decrease the life of the engine. How often should you check your oil? There’s no set rule.5 days ago.
Can I use 5W-30 instead of 5w40?
There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.
Which oil is better 5w30 or 10w30?
5w30 provides better lubrication compared to 10w30. It is best suited for private vehicles and light-duty diesel and petrol engines, while 10w30 is more suitable for commercial vehicles and other cars with heavy load engines.
What happens if I put the wrong oil in my car?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
Is 5W-40 good for hot weather?
40 weight oil is usually “good enough” for a hot climate, but there is hot and there is really HOT. And multi-viscosity oils does not stay multi-viscosity over its usual service life. So “You risk engine failure, and it is your fault, if that is not what your car’s manual says to use, or use for your climate.”.
What does 5W-40 mean?
5w40 motor oil has a winter viscosity grade of five, meaning it’s less viscous at very low temperatures, compared to, say, 10w40. It has a hot viscosity grade of 40, which means it is just as viscous as 10w40 at high temperatures but less viscous than oils such as 15w50.
Is 5W-40 better for high mileage cars?
According to Mobil Oil’s website, a heavy grade 5W-40 oil is best for use in vehicles that hold a diesel motor with high mileage. The use of heavy grade 5W-40 oils help to extend the life of diesel engines by protecting the engine against leaks, Z.
Can I use any 5w30 oil?
You should use the car engine oil suggested by the engine manufacturer in your vehicle. However, considering the temperature variations in the Middle East, the 5w30 should be perfect for use in your vehicle.
Can you put any engine oil in any car?
While it is not recommended to mix various brands of motor oil (such as Valvoline, Castrol, Total or Mobil 1), it will not cause any damage to your engine. What is far more important is to stick with the same oil viscosity as recommended by the car manufacturer.
What does 5w30 mean?
5w30 motor oil has a winter viscosity grade of five, meaning it’s less viscous (less thick) at very low temperatures compared to, say, 10w30. It has a hot viscosity grade of 30, which means it is less viscous at high temperatures than an oil such as 5w50.
What is 5w40 oil used for?
5w40 is a motor oil that helps the engine to work smoothly and the moving parts from overheat because of friction. 5w40 transfer heat from the combustion cycle and assist to keep the engine clean by burning by-product and protects the engine from oxidation.
Is 5w30 good for summer?
5w30 is a great multigrade oil for use in low starting temperatures as well as high summer temperatures. It is also more fuel efficient since it creates less drag on the bearings and moving engine parts.
Can I use 10w40 instead of 5w40?
Can I Use 10w-40 Instead Of 5w40? If you need a 10w-40, you can use 5w-40. Both oils are equivalent at operating temperatures of 40Wt. The second number is the operating temp viscosity (the number that matters most).
Is it OK to use 5W30 instead of 10W30?
Can you use 5W-30 instead of 10W-30? Absolutely yes for car engines, 5W-30 is usually synthetic and superior to 10W-30. Both have the same viscosity at the operating temperature of an average car engine. 5W has lower viscosity when cool and is considered better for the car engine during engine start.
What happens if you use 10W40 instead of 5W30?
If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.
Is it OK to mix 10W30 and 5W30?
No- you wont get the desired output by mixing these two oils. Because , both have different grades, 5w30 is more light and the density is less , and is intended for light usage (scooters). Whereas a 10w30 is a higer grade with more density and suitable for more higher capacity engines.
