Table of Contents
The best way to clean marble floors is by using hot water and a pH-neutral detergent, or an environmentally-friendly soap. You should steer clear of using acidic or alkaline products such as vinegar and baking soda. However, if you do choose to use baking soda on stubborn stains, do so with caution.
What is the best way to clean marble floors?
Clean your marble floors with a highly diluted mixture of ammonia and water or with a highly diluted mixture of dish soap and water. (No more than 1/2 cup per bucket of water). Once you’re finished mopping, we recommended you dry the floor using a soft, fluffy towel.
How do you clean and shine marble floors?
Eco Polishing of your Marble: Use a mixture of Baking Soda and water as a polish. Combine (45 g) of baking soda to (0.9 L) of water and mix well. Then using a clean cloth, apply the mixture to your surface in a thin layer. Allow to dry for about 5 hours.
What cleaning products are safe to use on marble?
Mild dish soap and water in a spray bottle makes a good marble shower cleaner, or you can use cleaners made for marble. According to The Spruce, a 12% hydrogen peroxide solution can help with tough stains. Avoid using vinegar, general household cleaners and bathroom cleaners containing chlorine.
How do I restore the shine to my marble floor?
Polishing marble floors If you want a higher shine on your cleaned floor, you can make a paste from 50/50 water and baking soda and spread it gently over the marble. Allow it to dry, then remove the residue with more water and a soft cloth.
How do you clean marble naturally?
You can mix a little soap into warm water in a spray bottle or simply put a few drops onto a wet cloth. Wipe the marble surface down with this sudsy cloth and follow immediately with a rinse and a dry. Be careful not to use too much soap, which may leave a film behind.
Which mop is good for marble floors?
Marble Mops Magic Dry Bucket Mop – 360 Degree Self Spin Wringing Wi Blue, White. 3.9. (57) 360° Rotate Universal Mop Rod | Plastic and Steel Handl Blue. 3.7. (78) MotoPanda 10pc Set Kitchen Sponge Wipe / All Surface Sp Multicolor. 4.1. (1,595) GALA Steel Mop Stick Rod with 1 Refill 360 Degree Rotat Blue. 3.7. (332).
How do you restore dull marble?
Keep the surface wet by spraying water on it before and during sanding. Use 120-grit sandpaper and sand in a circular motion. After sanding the entire surface, sand the surface again using 300-grit sandpaper and then a 600-grit after that and then clean the surface afterwards. Make sure there is no dust left.
How do you make marble shiny?
Dry the marble top with a chamois cloth. Buff it to a shine by rubbing the entire surface with the cloth in small circles. Cover the surface with commercial stone polish or marble-polishing paste if you want more shine after buffing with a chamois. If using a spray-on stone polish, wipe with a soft rag.
Can marble floors be waxed?
There’s a wide variety of marble floor polish and marble wax available. Self-polishing marble wax is a great way to get a shiny, glossy finish without a ton of time. Once you’ve removed any stains or marks from the floor with a commercial marble cleaner, you can apply a self-polishing water-based wax to the surface.
What should you not use on marble?
Unfortunately, most common and popular household cleaners like bleach, vinegar, ammonia, citrus cleaners, and hydrogen peroxide are too harsh for use on marble and will cause damage to the finish. This includes brand-name cleaners as well.
Is baking soda safe on marble?
Baking soda is alkaline so you should only use it with caution. It is also a mild abrasive, so you need to use it gently rather than applying elbow grease. Because of these factors, a baking soda cleanser should not be used on marble every day. Frequent use could dull your marble countertop.
Is vinegar safe on marble?
Never use acidic limescale removers, lemon, vinegar, or citrus-based soaps to clean a marble tile shower. Since marble is such a soft natural stone, acidic cleaning products can etch and damage the sealant that protects the stone. The powerful cleaner dissolves tough stains and watermarks without damaging the marble.
Why is my marble floor dull?
The dull spots are caused by corrosion of the marble surface from contact with acidic foods/drinks (coffee, soda, juice, wine) and harsh alkaline cleaning products (most common household cleaners will damage marble). It’s called “etching.” A stain occurs when something is absorbed into the marble causing a darker spot.
How often should marble floors be sealed?
Marble is a fairly porous natural stone material that readily absorbs moisture, which means that it can be stained quite easily. But protecting marble against moisture intrusion, as well as against stains, is relatively easy: seal it when you install it, and maintain it by sealing it every year or so after that.
Can you use Windex on marble floors?
Avoid acidic & citrus cleaners. Any cleaner with pH above 10 etches marble which is why bleach (pH 12) and ammonia (pH 11) are not for cleaning marble. Also bad are nearly all name-brand cleaners like Windex, 409, Tilex, Lime Away, Kaboom, CLR, and Lysol. Avoid abrasive cleaners or pads or you may scratch the finish.
Can you use Clorox wipes on marble?
Marble is a porous stone and when these surfaces come into contact with acidic liquids and abrasive cleaners, it could cause scarring, staining and permanent damage to your stone. Bleach, vinegar and cleaning products from household names like Clorox and Lysol can all cause irreparable damage to marble countertops.
