Table of Contents
15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.
What nail gun is best for trim work?
Best Finishing Nail Gun For Trim BOSTITCH 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer. DEWALT 18-Volt Cordless 20 Degree Angled Finish Nailer. BOSTITCH 20V MAX Cordless Straight Finish Nailer. NuMax 16 Gauge Straight Finish Nailer. Hitachi 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer.
Can you use a brad nailer for trim?
For detailed woodwork and trim, where you need more holding strength than a micro pin can provide, a brad nailer is typically the top choice among contractors and weekend warriors alike. Brad nails are formed from a fine, 18-gauge wire, which means they are smaller in diameter and typically have less holding strength.
Can you use 18 gauge nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
What kind of nail gun do I need for door trim?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
Can I use brad nails for baseboard?
You can use a brad nailer to attach baseboards to the wall, though sometimes a finishing nailer might be best. Brad nails are smaller and thinner, ideal for delicate pieces of trim. Finish nails are thicker and have a stronger grip, typically the better choice for tall and long pieces of a baseboard.
Can I use a staple gun for trim?
Some staple guns handle round-crown as well as regular staples, while electric staple guns can handle brads for molding and trim work.
Should I use brad nails or finish nails for baseboards?
The added thickness means that finishing nails create a stronger hold than brads. This makes them useful for heftier applications with thicker material, such as cabinets or baseboards. Because they are thicker than brad nails, finish nails are more likely to split thin or delicate pieces of wood trim.
What gauge finish nails for trim?
15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.
What is a brad nailer gun used for?
Brad nailers are used by woodworkers and especially finish carpenters to install casing and base trim up to 3/8 inches thick. For reference: larger guns, called finish guns, shoot 15-gauge and16-gauge nails and are used to install thicker trim (1/2” and up).
Is 18-gauge nailer good for trim?
18-gauge brad nailer It’s perfect for standard trim, furniture making and odd jobs around the shop. Models that shoot brads up to 1-1/4- in. are common, but I strongly recommend spending a few bucks more for a gun that can handle brads up to 2 in.
Can you use 23 gauge nails for baseboards?
In most cases, you wouldn’t use a 23 gauge pinner for baseboards. The nails it can handle are simply too short and thin to do the job. This type of nailer works best for attaching little parts for a small wood project.
Do all nail guns require a compressor?
While no nail gun requires a specific compressor, each has specific air requirements. Nail guns operate between a range of pressures measured in pounds per square inch (psi). In addition to pressure, nail guns require a minimum volume of air for correct operation. This volume is rated in cubic feet per minute (cfm).
What kind of nail gun do I need for 2×4?
As the name suggests, framing nailers are designed for the construction task of framing a structure, such as a house. This requires nailers to drive large 10D nails, up to 3.5 inches in length, into 2x4s.
What is the difference between a brad nailer and a pin nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
Why is it called a brad nail?
In conclusion, a brad is called a brad because of its nature and its use in both paper and wooden projects. Brads are excellent choices when you want to conceal the nail in your work, unlike finished nails that have a bigger head. Brads have smaller heads and all these qualities are what make a brad a brad.
