Table of Contents
Pool Chemicals 101 For Above Ground Pools Chlorine. We all know this is the most important chemical for pool care. Calcium. Calcium chloride is a hardener, which helps reduce stains- especially on vinyl above-ground pools. Cyanuric Acid. This chemical helps keep chlorine stable. Algaecide. Alkaline. Shock. In Review.
What chemicals do I need to start up my above ground pool?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
What chemicals are needed for above ground Intex pool?
Intex Pool Chemical Startup List Alkalinity increaser (sodium bicarbonate) Alkalinity decreaser (sodium bisulfate) pH increaser (sodium carbonate) pH decreaser (sodium bisulfate) Calcium hardness increaser (calcium chloride) Sanitizer (liquid chlorine, chlorine tablets, Intex saltwater pool system).
What basic chemicals do I need for my pool?
What Chemicals Are Needed for Pools? TriChlor: 3-inch tabs, or 1-inch tabs or sticks. Dichlor: Granular. Bromine: 1” tabs. Cyanuric Acid: Liquid or dry chlorine stabilizer. Calcium Hypochlorite: Cal Hypo pool shock is used to quickly sanitize pool water, boost chlorine levels and kill algae.
How do you treat an above ground pool for the first time?
Step 1 – Clear off the water, debris and anything else from the pool cover. Step 2 – Remove the pool cover. Step 3 – Pull the winter plugs and accessories out. Step 4 – Top up the water in your pool. Step 5 – Reinstall the pool ladder. Step 6 – Prepare the pool filtration system. Step 7 – Power your filtration system up.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Do you put chlorine in above ground pools?
Chlorine is essential for pool water because it kills harmful algae, bacteria and microorganisms. Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips. Learn more about maintaining your pool’s chemicals.
Should I put chlorine in my Intex pool?
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Can you use liquid chlorine in a vinyl pool?
Liquid chlorine can be added immediately, but should be poured out to very specific areas of the pool. Never place chlorine tablets in skimmer basket. This could result in a high concentration of chlorine to develop around the skimmer and main drain, which will damage the liner.
When should I add chemicals to my pool?
Start by Testing Your Water Most experts recommend testing pool water 1-2 times per week. As you test and wait for the results, you can get your supplies ready for adding chemicals.
How soon after filling a pool Can you swim?
Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it’s advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool’s water—or until one filter cycle has been completed.
How long does it take to fill a 18×48 pool?
It takes nine hours to fill a 5,000-gallon pool at 540 gallons per hour.
Can I fill my above ground pool overnight?
If necessary, clean the pool so that you will have clean water right from the start. When you are ready to begin adding water, make sure you start with a low pressure source such as a garden hose. It is never recommended to leave your home during this time or to fill your pool overnight.
How many tablets of chlorine do I put in my pool?
To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you’d still use four, three-inch chlorine tablets.
How often should I put chlorine in my pool?
Depending on your chemical needs, you probably need to add chlorine shock every two weeks. The pools that I’ve worked on, average backyard pools in Oklahoma that use a floater; 3 tabs every week on the same day. Four tabs when the outside temperature stays above 80 overnight all week.
How often do you add chlorine to above ground pool?
Pool Maintenance (Ongoing) Step 1: Always keep chlorine level in the safe range on your test strip. Test after daily. Run your pool filter at least 6 to 8 hrs every day. Step 3: Add maintenance dose of algaecide per label instructions weekly. Step 4: Add 2 oz of Super Clarifier per 5000 gallons of pool water each week.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
Should I use a floating chlorine dispenser?
We do not recommend using floating chlorine dispensers in inground liner pools. They are great until they get caught in the step or skimmer area or sink to the floor of the pool, laying chlorine right onto the vinyl. Below, you can see the chlorine damage to a vinyl liner caused by a floating chlorine dispenser.
