Table of Contents
Can I clean my own chimney flue?
In many cases, you can clean the chimney yourself and save a few hundred dollars. Removing ordinary chimney soot is pretty simple. But if you have heavy creosote buildup, you’ll have to call in a pro. Otherwise, hire a certified chimney sweep.
How is a chimney flue cleaned?
Brushing the Chimney Flue from the Top or Bottom Using a wire brush, reach in the chimney and clean the inner walls of the flue with an up-and-down motion. Chimney brushes come with extensions, so attach more as needed to brush the length of the flue until you reach the smoke shelf at the bottom.
How much does it cost to clean a fireplace flue?
The typical chimney cleaning cost is between $129 and $377. Wood fireplaces that receive regular maintenance price $85 to $100 per cleaning. Those with build-up from years of neglect could total as much as $800. Chimney cleaning kits run between $50 to $100.
Do chimney cleaning logs really work?
Many homeowners wonder if the chimney sweep logs or creosote sweeping logs really work to clean out fireplace flues and get rid of creosote residue so that the fireplaces are safe to use. The short answer is no, they don’t work. At least, not well enough to completely clean out the flue the way it should be cleaned.
How can I tell if my chimney needs cleaning?
Here are seven tell-tale signs that indicate your chimney or fireplace needs cleaning: Your fireplace smells like a campfire. Fires burn oddly. It takes more effort to get a fire going and keep it going. Smoke fills the room. The fireplace damper is black. Fireplace walls have oily marks. There’s evidence of animals.
How often should you sweep your chimney?
Both the NFPA and Spisto recommend getting your chimney cleaned and inspected once a year by a qualified professional. Carli says that regardless of chimney type, you should you have your chimney swept at least one time a year.
What’s the difference between chimney and flue?
What’s the difference between a chimney and a flue? A flue is the channel, pipe, or tube through which gases and smoke travel from a source of combustion (fireplace, furnace, boiler) to the outside environment. A chimney is, on the other hand, in its simplest definition, the housing that encases the flue.
What is the difference between chimney sweep and chimney cleaning?
What is the difference between a chimney cleaning and flue cleaning? A chimney cleaning is technically a type of flue cleaning. A chimney sweeping or chimney cleaning requires special equipment and expertise to remove tough soot and creosote buildup unlike a utility flue cleaning.
What is the difference between chimney sweep and cleaning?
The difference between a chimney sweep and chimney inspection is slight but crucial. Cleaning removes the deposits that have built up over time. Inspections are professional examinations of the installation, condition, and structure of your chimney.
How long does a chimney sweep take?
How long does it take? It usually takes approximately half an hour to sweep each chimney. Occasionally this may take a little longer. Blockages (e.g. a bird’s nest) take more time to clear because of the amount of debris that has to be removed.
What happens if you don’t clean your fireplace?
Ignoring this critical task of chimney cleaning can cause blockage and buildup of toxic gases within your home. When gas and smoke can’t vent outside properly, it can billow back into your home. Aside from that, not cleaning your chimney can also cause a chimney fire.
What does chimney creosote look like?
Creosote is the black or brown residue that forms as a result of wood-burning fires inside a fireplace. It can be crusty, flaky, drippy, sticky, shiny, or hard.
Do potato skins help clean chimneys?
In all honesty, however, the old wise tale about burning potato peelings/skins does in fact help. Although you still need to have your chimney cleaned regularly, because even potato peels won’t prevent the chimney from getting dirty, but it will help decrease chances of a chimney fire due to creosote.
What dissolves creosote?
Creosote is moderately soluble in water. Spraying water onto the creosote will help to remove the liquid. However, creosote is a type of oil that is never removed fully by water. Bleach and industrial cleaners will help to pull the creosote out of clothes and off of skin or other surfaces.
Will burning aluminum cans remove creosote?
Burning aluminum cans does not get rid of the creosote, it merely turns it to flakes and powder. It remains necessary to physically clean the chimney with the correct chimney brushes.
How often should you sweep a wood burner flue?
How Often Should You Sweep your Chimney. You should have your chimney swept at least once a year as a bare minimum. This ensures your chimney is kept as clean as possible and prevents buildup that will become harder to remove if you leave it.
How do you know if you have creosote build up?
Unexplained poorly burning fires, a reduced draft or black deposits around your fireplace can all be signs of creosote buildup. To check for creosote buildup look for black soot or tar deposits around the opening of your fireplace, as well as around the throat of the chimney.
What does a flue fire sound like?
A loud, crackling or popping noise from the chimney flue (imagine the sound of a large bonfire) A lot of dense, thick smoke coming into the fireplace or out of the top of the chimney. Flames or things that are on fire (pieces of flaming creosote) coming from the top of the chimney. A strong, intensely hot smell.