Table of Contents
Place the fresh or fully thawed turkey into the fryer basket, breast side up or according to the manufacturer’s recommendations. When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound.
How many minutes does it take to deep fry a turkey?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
How long does it take to cook a 12 pound turkey in a turkey fryer?
Turkey Temperature Tip: Pull the turkey out of the oil at 157ºF*. Most 12-14 pound turkeys will cook in 30-45 minutes. (With turkeys larger than 14 pounds, you run the risk of overcooking the outer parts of the meat while you wait for the inner meat to reach pull temperature.).
How long does it take to cook a turkey in an electric fryer?
Lower the lid on the fryer and set a timer. You will fry the turkey about 3-4 minutes per pound until the turkey reaches an internal temperature of about 165f degrees (if thermometer is inserted into the breast meat) and 180f degrees (if thermometer is inserted into the thigh meat.)Nov 12, 2016.
When should you inject a turkey before frying?
Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.
What oil do I use to deep-fry a turkey?
You can deep-fry the turkey in either peanut or vegetable oil, your choice. We use a 26 quart aluminum pot with a drain basket.
How long do you fry a 14 lb turkey?
Fry Until the Turkey Reaches 165°F A deep-fried turkey typically requires 3 1/2 minutes per pound, so a 12- to 14-pound bird will take 40 to 50 minutes to reach 165°F. When checking the bird’s internal temperature, use the hook that attaches to the poultry rack to slowly lift the turkey from the oil.
How long should you fry a 15 pound turkey?
Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.
What temp is oil when frying turkey?
When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F). You’ll need 2.5-3 gallons of oil.
How long does a 20 pound turkey take to fry?
When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.
How do you get crispy skin on fried turkey?
I suggest you break down a turkey into its pieces, using the thighs, breasts and legs. Brine the pieces, then dry them out in the refrigerator to ensure extra crispy skin, before simply dipping the turkey in buttermilk and seasoned flour. I guarantee that using this method will give you perfect results every time.
How long does it take to heat oil to 350?
Set your burner on medium and let your pan of oil heat for around 5 to 10 minutes. Put the meat thermometer in the center of the oil to check the temperature. The oil should be between 350 degrees Fahrenheit (177 Celsius) and 400 F (205 C), depending on what you’re cooking.
Does turkey have to be fully submerged in oil?
Remember, when thawed completely, the food must be cooked immediately. For more, see our Big Thaw fact sheet. When working with large amounts of hot oil, select a cooking vessel large enough to completely submerge the turkey without it spilling over. The oil should cover the turkey by 1 to 2 inches.
Do you have to use peanut oil to fry a turkey?
Which Oil Should You Use to Fry Turkey? Peanut oil is the best oil for deep frying turkey because its high flash point makes it less likely to catch on fire. The best oil for fried turkey should also be low in saturated fat because the turkey will absorb a small amount of oil as it cooks.
Should turkey be room temp before frying?
Allow to sit at room temperature for at least 30 minutes prior to cooking. Once the breast reaches 151 degrees F, gently remove from the oil and allow to rest for a minimum of 30 minutes prior to carving. The bird will reach an internal temperature of 161 degrees F due to carry over cooking.
Do you cover a frying turkey?
The cover will help the oil come back to the proper temperature quicker and will protect against oil splatters. It is important that the temperature of the oil is maintained at 350°F. Do not allow the temperature to drop below 325°F. If the oil is not hot enough the turkey will soak up the oil and not cook properly.
Should I inject my turkey overnight?
How long before cooking do you inject a turkey? You can inject the turkey up to 36 hours in advance of when you cook it. But, you should let the turkey sit for at least 12 hours after injecting flavor. This allows the flavors a chance to penetrate the turkey meat.
Can I mix canola and peanut oil for frying?
Canola oil and peanut oil both have high burning points, and so combining them would not cause any problems. However, be cautious to keep in mind that peanut oil will provide a nuttier flavour that you wouldn’t have with canola oil alone. Both are ideal for deep frying, and combined together would also work well.
Should I put olive oil on my turkey?
You may be wondering if you can use olive oil instead of butter on turkey for The Best Oven Roasted Turkey and the answer is, yes. Use olive oil on turkey instead of butter. Olive oil is a nice, healthy alternative to butter and it won’t compromise the taste at all.
Can you reuse peanut oil for frying?
Yes, you can reuse it. But there are a few rules for happy oil recycling. Because frying occurs at high temperatures, use oils with a high smoking point that won’t easily break down. These include canola, peanut, or vegetable oils.
