Table of Contents
Measuring Your Chainsaw Bar To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
How are chainsaw bars measured?
How To Measure a Chainsaw Bar Place a tape measure at the very tip of the bar. Measure straight back to the point where the bar enters the chainsaw body. Round that measurement up to the nearest even number.
Can I put a 20 inch bar on a 18 inch chainsaw?
A chain saw engine turns a sprocket. Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs. Put work gloves on to protect your hands and fingers.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
Can I put an 18 inch bar on a 16 inch chainsaw?
Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.
What is the difference between .325 and 3/8 chain?
325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .
What size chain is on a Stihl ms180c?
Quick Chain Adjuster (QCA) (B) POWER SOURCE Gas GUIDE BAR LENGTH (Recommended) 16 in. OILOMATIC® CHAIN 3/8″ PMM3 CHAIN OIL CAPACITY 4.9 oz. ENGINE POWER 2.0 bhp.
Will any bar fit a chainsaw?
Not every bar or chain is right for every saw. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars. Try to fit a chain onto a bar that’s too narrow or too long, and you’ll find that your saw simply won’t work.
What size bars does STIHL make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
Are chainsaw bars universal?
Are chainsaw bars universal? AdvertisementsA: Chainsaw bars are not universal. Instead, bars are specific to a chain type and have different, incompatible mounts. More specifically, chainsaw bars vary both in mount geometry as well as in intended chain pitch and gauge, which must match those of your saw and chain.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
Why does a chainsaw cut crooked?
Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting. Cutting with a dull chain can accelerate wear to the bar and chain. If you sharpen your chain at a 25º setting on your left hand, your right hand cutters should match.
Do chainsaw bars wear out?
As a chainsaw bar wears out, you’ll lose cutting accuracy and efficiency. You shouldn’t notice a whole lot of back-and-forth, but a worn chainsaw bar will allow a lot more movement side to side. There’s a reason for this. Your chain fits into your bar tongue-and-groove style.
What is the biggest chainsaw that Stihl makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
What does the pitch mean on a chainsaw chain?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
What size chain does a Husqvarna 450 Rancher take?
0.325 inch pitch chain with a . 050 inch gauge.
Can I change the pitch on my chainsaw?
Yes, pitch does matter. If you change to .
What size file do I need for a Stihl MS180c?
4mm 5/32″ 5605 007 1027 GENUINE.
Can you put an 18 inch bar on a Stihl ms170?
Homeowner Chain Saws Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.
