Table of Contents
What Does a Furnace Filter Do? The primary function of a furnace filter is to trap airborne contaminants not for air quality purposes, but to keep them out of your heating and cooling system. However, because the filter removes contaminants for the system’s benefit, air quality also benefits from their removal.
How do I know if I have a furnace filter?
Horizontal HVAC unit – Furnace filter will be located on the intake side, slid into a rack. Vertical HVAC unit with air moving upwards – You can find your furnace filter in the bottom door. This is where the blower is. You will need to open both the top and bottom doors to get to the filter.
Is furnace filter same as air filter?
Furnace filters, also known as air filters, are necessary components that not only keep your home’s air clean, but also help extend the life of your furnace.
What happens if you don’t change your furnace filter?
Short Cycling If the air filter is not serviced often enough, it will eventually become clogged to the point that air cannot pass through it. When the furnace is operating, the lack of air flow will trap the heat in the system. Without a new air filter, the furnace will overheat every time it starts up again.
Are furnace filters necessary?
NO. A furnace filter has a critical job to perform and a filter cannot be run without one. For a furnace to work properly, it should always be equipped with a clean, working filter. As we’ll see, a dirty filter can cause problems, and so can having no filter at all.
Where is my air filter located?
The air filter is typically located at the point where the return duct enters the air handler. Larger houses often have more than one HVAC system. Each system will typically have at least one air filter. Therefore, your home may have air filters located at the air handler AND in the returns.
Do Dirty air filters make your house dusty?
A clogged or dirty air filter can spread contaminants such as dust, dirt, pollen, and pet dander instead of catching them. It can also restrict your system’s airflow, forcing it to work harder and use more energy. Clogged air filters can dirty your ductwork and leave lots of extra dust throughout your home.
Why is my heat blowing cold air?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
How often do you change your furnace filter?
In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.
Where is your furnace filter located?
The furnace filter is usually located inside of the blower compartment, where the return air enters the blower compartment. Most units have built-in furnace racks. The large metal furnace compartment contains a filter and blower.
How much does it cost to replace a furnace filter?
Changing Your Furnace Filter Costs for new filters range based on brand but tend to be around $10 to $30. The filter keeps dust and dirt from your furnace components and improves your air quality. Some annual inspections will include changing and cleaning this part of the unit.
How do I know when to replace my furnace filter?
The best test to know if a furnace filter is ready to be changed is to hold it up to a bright light . If you can still see light through the filter then air is still getting through the filter. If you suspect the filter is dirty enough to restrict the air flow, then change it out to a new filter.
Can you vacuum and reuse furnace filters?
Some air filters — permanent and semipermanent models — can be cleaned as part of regular HVAC system maintenance and replaced for continuous use. At regular intervals, you must remove it from the HVAC cabinet, throw it away, and install a fresh filter. Disposable air filters shouldn’t be vacuumed or moistened.
Will furnace stop working if filter dirty?
1. Dirty furnace filters. Dirty air filters are often the culprit behind an inefficiently performing furnace. That’s because air filters trap dust, dirt and debris like hair, which over time can restrict or block vital airflow, overheating the heat exchanger and preventing your furnace from working as it should.
Can I run my HVAC without a filter?
The short answer is yes, your HVAC system can run without a filter. However, just because it can doesn’t mean it should. Running your HVAC unit without a filter is probably fine for a short period of time, but continuing to do so for over six hours is already pushing it.
Is no air filter better than a dirty one?
Running your air conditioner without a filter is worse than running it with a dirty one. Instead, get to the store as soon as possible for a replacement or call an HVAC professional for replacement. Without a filter, your air conditioner is at risk for severe and expensive problems.
What does an air filter look like?
A clean air filter appears white or off-white in color, but as it accumulates dust and dirt, it will look darker in color. However, very often, the inner layers of filter paper inside the air filter might have dust and debris that is not visible even in bright light.
How many filters are in a furnace?
Most furnaces will have a V shape filter system; the system will take 2 filters. The filters go up into the plenum in a V shape. Make sure that when you re-install the top door, it goes over the furnace frame so it engages the safety switch.
