Table of Contents
That’s why highly rated auto mechanics recommend replacing it every 60,000 to 105,000 miles based on the vehicle’s factory recommended maintenance schedule, your individual driving habits and conditions as well as time before the belt breaks or has a catastrophic failure.
Can a timing belt last 200 000 miles?
Of course the timing belt itself has to be replaced at, whichever comes first, the time or the mileage in the owner’s manual. There’s no way that these various components are going to last through two timing belts – they’re not going to last for 200,000 miles in most cases.
How much does it cost to replace a timing belt?
The average cost to replace a timing belt will be anywhere from $300 to $500 in total (more for larger cars, trucks, and SUVs). The timing belt itself will usually only cost less than $50 but the majority of a timing belt job is spent on labor. The cost of the labor will be anywhere from $250 to $450 or more.
How long do timing belts really last?
Depending on what schedule you may read, including information distributed by the manufacturers themselves, the average life span of a timing belt is between 60,000 and 105,000 miles or after 7 to 10 years regardless of mileage.
What are the signs of a timing belt going bad?
Symptoms of a Bad or Failing Timing Belt You Hear A Ticking Noise Coming From The Engine. Your Car’s Engine Won’t Turn Over. You Notice An Oil Leak Near The Motor. You Experience Exhaust Issues. Your Revs Start Acting Up.
Do timing belts break often?
The belt runs on a pulley from the crankshaft to the camshaft. Although timing belts are critical, it is not true that they should be regularly replaced unless explicitly recommended in the owner’s manual. Many timing belts can go more than 100,000 miles without failing.
What happens if your timing belt breaks while driving?
If a timing belt breaks while driving in an interference engine, the camshaft stops turning leaving some of the engine valves in the open position. This may result in a heavy damage to the engine with broken or bent valves, damaged pistons and, possibly, destroyed cylinder head and block.
What does a worn timing belt sound like?
A failing bad timing belt sounds like a ticking noise in front of your car when it starts wearing out. If the belt eventually breaks, it will give a whining noise when trying to start the engine. A whining noise sounds like no compression in the engine.
What happens if you don’t replace timing belt?
Because the timing belt is made of rubber, it will wear down over time and eventually break. If you don’t replace the timing belt at the recommended time, you could end up with total engine failure, broken or bent valves, cylinder head or camshaft damage, and piston and cylinder wall damage.
Can I replace timing belt myself?
But if you are and you enjoy doing your own repairs or restorations then it’s something you can do yourself, and save on some big repair bills in the process. We’ll walk you through the process of replacing a timing belt and water pump step by step, starting with the tools you’ll need.
Which is better timing belt or chain?
Most automakers recommend replacing the timing belt every 60,000 to 105,000 miles. Timing chains are heavier and more complex than timing belts, but they also last much longer. Really, unless there’s a problem, timing chains don’t have a replacement interval.
How long can you drive on a timing belt?
Your owner’s manual is a good resource and will recommend the mileage interval recommended for your specific vehicle make and model.” The recommended replacement according to mileage ranges from 60,000 miles to 150,000 miles. If your vehicle is 6 to 10 years old, it is recommended to replace the timing belt.
Can a timing belt destroy an engine?
As your vehicle gets older and accumulates miles, its timing belt wears out and becomes compromised. While timing belt replacement is a simple service to perform, if a worn out timing belt snaps, it can seriously damage your engine and cost you thousands.
Is it safe to drive with a loose timing belt?
Losing power can cause a loss of fuel economy, and also not allow your engine to run if the timing is off completely. There is a high risk of engine damage if your timing belt is not working properly. In some cases, the belt can slip off entirely. This would not be a good situation for you when driving.
What causes timing belt to go out?
The tensioner that keeps the belt taut is pressurized by the engine oil. If the tensioner has no oil pressure, the belt will become loose and possibly disengage from the pulleys and/or break. If the camshafts don’t have enough oil pressure to operate properly, they will also lock up, causing the timing belt to break.
What causes timing belt failure?
Misalignment is one of the main causes of timing belt drive failure. Excessive or uneven tooth wear, belt tracking and tensile failure can all be attributed to misalignment. By checking and aligning your shafts and timing pulleys you can increase the life of your timing belts and save yourself lots of downtime.
