Table of Contents
10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite (dry lubricant is usually allowed). Sand and polish your wheels and axles. Check alignment. Spend time on sanding. Use a high-quality paint. Add decals!.
What is the fastest shape for a pinewood derby car?
But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track.
Where is the best place to put weights on a pinewood derby car?
Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.
What is the average speed of a pinewood derby car?
The Speed of Pinewood Derby Cars The distribution plot below shows a range of speeds from 177 mph to 229 mph, with most cars exceeding 200 mph.
Does a heavier pinewood derby car go faster?
Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow. In general, it’s best to place weight to the rear of your car because a heavier rear increases speed.
Do fenders help Pinewood Derby?
Pinewood Derby Fenders / Air Guides Add pizzazz to your pinewood derby car with our sleek fender accessories! Fenders improve air flow over the wheels resulting in a few milliseconds of advantage, during a tight race. Both front and rear fenders are available and are typically used together.
What is the perfect weight for a pinewood derby car?
First, the basics: Your car should weigh as much as it’s allowed. In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights.
Should I bake my pinewood derby block?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. Baking might remove more moisture but the block will quickly re-absorb the moisture after it is out of the oven and cooled down.
How much weight does paint add to pinewood derby car?
Paint only adds a few grams (hundredths of a ounce). We generally weight up to 4.9 oz and then do the last weight adjustment at check-in.
How do you time pinewood derby?
Scroll to the End Marker and adjust it so it is exactly on the position where your pinewood derby car hit the box or the track break. Note the time in the End Marker. Subtract the start time from the end time to get the car’s total time. Tap you phone’s back button to start over and time another run.
Do you glue pinewood derby axles?
7. Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.
What is the best type of paint to use on a pinewood derby car?
ByBrittney. Pinewood Derby cars were painted over 100 times, and we selected the best paints for them. Sand and paint are the best way to apply these high gloss acrylic paints – they do not require primer or wood sealer.
How do you reduce friction on a Pinewood Derby car?
The easiest way to reduce friction is to lubricate the surfaces that cause friction. Lubrication is an essential part of pinewood derby racing. Purchase a tube of dry PRO Graphite with moly and shoot it onto the axle shaft and inside the wheel bore. Spin the wheel so the graphite works in.
How do you win a Pinewood Derby race?
10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite (dry lubricant is usually allowed). Sand and polish your wheels and axles. Check alignment. Spend time on sanding. Use a high-quality paint. Add decals!.
Where is the center of gravity on a pinewood derby car?
Center of gravity placement should be between 1⁄2″ – 1″ in front of the rear axle. This is true for all wheel base types. Whether you are using a standard wheelbase or an extended wheelbase.
How do you glue weights on a pinewood derby car?
Epoxy can be used for attaching metal accessories to the car and, since it does not shrink when dry, it works well for gluing weight into holes or pockets. It can also be used for gluing wood to wood, but I recommend yellow, white, or tacky glue for that use.
Why does my Pinewood Derby car wobble?
Pinewood Derby Wheels Wobble are a very common issue. Derby wheels are made with an injection molding process. Because they are not machined from raw material, flaws such as concentricity (wobble) will cause a wheel to wobble because the bore is not aligned with the outer diameter. No wheel mold is safe from flaws.
Do aerodynamics matter in Pinewood Derby?
A more aerodynamic car (but very similar for other things) doesn’t give you much bang for your buck. Friction will get you. If you can reduce the coefficient of friction by just a little bit, it will make a noticeable difference. If you let your kids do most of the work, they will gain more than a win.
