Table of Contents
Measure the distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw’s casing. A tape measure will provide that information. Round the measurement up to the nearest even number if the figure was uneven or fractional. The resulting number is the bar measurement.
How do you measure a chainsaw chain length?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
How are chains measured?
To measure, wrap a soft tape measure around your neck, keeping the tape measure parallel to the floor as you measure. Then, add 2 to 4 inches (5 to 10 cm) to your neck measurement to calculate your minimum recommended chain length.
How do I know what size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
How do you measure a log chain?
Chain Link Sizes: How to Measure Chain Link Sizes Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
What size chain do I need?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
How do you measure a tow chain?
To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.
What do the numbers on a Stihl chain mean?
The Stihl chainsaw scale Each model number contains three sections: MS, MSA, or MSE + numbers + letters. Let’s start with MS, a straightforward one to explain. MS stands for Motorsäge (chainsaw in German), and MSA means it is a battery chainsaw, while MSE indicates it is an electric chainsaw.
What is the difference between Stihl green and yellow chain?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker.
What do Stihl chainsaw chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What does the pitch mean on a chainsaw chain?
Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.
How long is a 20 inch chain on a woman?
20″: A 20″ necklace falls a few inches below the collarbone, perfect for women who want some breathing room with their chain. This length chain works best with a higher neckline.
Is a 22 inch chain too long?
For example, if a man’s neck is 17 inches, then a 19 inch necklace would be the smallest size expected to fit comfortably. This length necklace can be worn inside or outside a shirt. 22 Inch. Another very common length for a man’s necklace, it can work nicely a cross, dog tag, or other pendant is added to the chain.
Can I put an 18 inch bar on a 16 inch chainsaw?
Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.
How big is a 8mm chain?
Size Guide Chain width (in millimeters) Chain width variances (in millimeters) 7.00mm 6.75 – 7.25mm 8.00mm 7.75 – 8.25mm 9.00mm 8.75 – 9.25mm 10.00mm 9.50 – 10.50mm.
How thick is a 2mm chain?
2mm is approximately equal to 1/16 inch. 3mm would be slightly thicker.
