Table of Contents
To measure a chainsaw’s effective cutting length (or simply, “length”): Place a tape measure at the very tip of the bar. Measure straight back to the point where the bar enters the chainsaw body. Round that measurement up to the nearest even number.
How is Stihl guide bar length measured?
What is the average chainsaw bar length?
The most used and universal chainsaw bar size is 14-16 inches. Such bar allow both the production of firewood and the use of a chainsaw (electric saw) as a delimbers. Chainsaw bar 18 – 22 ″ are used for cutting thick trees when harvesting firewood.
What are chainsaw bar sizes?
To preface, the standard bar lengths for chainsaws are 16, 18, and 20 inches. However, longer bars do exist and can exceed 24 inches. When taking a measurement, you should round to the nearest even whole number.
Can I put a 20 inch bar on a 18 inch chainsaw?
A chain saw engine turns a sprocket. Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs. Put work gloves on to protect your hands and fingers.
What does 72 mean on a chainsaw chain?
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.
Can I put an 18 inch bar on a 16 inch chainsaw?
Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.
What is the most popular chainsaw bar length?
A blade bar length of between 14 to 18 inches should serve you well in most cases. You can cut some fairly thick branches with that length of blade bar. It’s still not long enough to handle some of the toughest jobs, but it’s ideal for home use.
What is the most common chainsaw length?
Most residentially used chainsaws fall between 16 and 24 inches of bar and chain length, and are supported by 32 to 62cc engine displacements (although 62cc is on the high end for most property management purposes).
How do you measure the length of a bar?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
How do you measure a log chain?
Chain Link Sizes: How to Measure Chain Link Sizes Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
Can you put any bar and chain on a chainsaw?
More specifically, chainsaw bars vary both in mount geometry as well as in intended chain pitch and gauge, which must match those of your saw and chain. Because of this, you cannot just fit any bar on any saw.
Can you put any length bar on a chainsaw?
Stihl’s electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches. The little battery-powered MSA 160 is equipped with a 12-inch bar.
What size bars does STIHL make?
STIHL guide bars range from 10″ (found on our tree-trimming pole pruners) to an incredible 59″ (used in extreme felling operations).
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
What chainsaw chain cuts the fastest?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).
What do Stihl chain numbers mean?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
Do chainsaw bars wear out?
As a chainsaw bar wears out, you’ll lose cutting accuracy and efficiency. You shouldn’t notice a whole lot of back-and-forth, but a worn chainsaw bar will allow a lot more movement side to side. There’s a reason for this. Your chain fits into your bar tongue-and-groove style.
Why does a chainsaw cut crooked?
Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting. Cutting with a dull chain can accelerate wear to the bar and chain. If you sharpen your chain at a 25º setting on your left hand, your right hand cutters should match.
What is the biggest chainsaw that Stihl makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
