Table of Contents
Top Tips for Maintaining an Above Ground Pool Install a Sump Pump in Your House. Test the Chlorine Level. Do Weekly Shock Treatments. Test the pH Level. Run the Pool’s Pump at Least Eight Hours a Day. Regularly Clean and Replace the Filter. Regularly Clean Out the Pump and Skimmer Baskets. Vacuum Often.
What chemicals do I need to start up my above ground pool?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
How do you treat an above ground pool for the first time?
Step 1 – Clear off the water, debris and anything else from the pool cover. Step 2 – Remove the pool cover. Step 3 – Pull the winter plugs and accessories out. Step 4 – Top up the water in your pool. Step 5 – Reinstall the pool ladder. Step 6 – Prepare the pool filtration system. Step 7 – Power your filtration system up.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Do you put chlorine in an above ground pool?
Chlorine is essential for pool water because it kills harmful algae, bacteria and microorganisms. Make sure your above ground pool has enough by testing your water about every other day with chlorine test strips, such as these Aqua Chek Test Strips.
How soon after filling a pool Can you swim?
Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it’s advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool’s water—or until one filter cycle has been completed.
Can you maintain a pool with just chlorine?
Chlorine keeps a pool clean, clear, sanitized and safe. While a typical free available chlorine level is recommended at 1-3 parts per million (ppm), without the pump or filter, you should maintain somewhere in the 3-4 ppm range to prevent debris, algae and other problems from potentially developing.
How often do you add chlorine to above ground pool?
Pool Maintenance (Ongoing) Step 1: Always keep chlorine level in the safe range on your test strip. Test after daily. Run your pool filter at least 6 to 8 hrs every day. Step 3: Add maintenance dose of algaecide per label instructions weekly. Step 4: Add 2 oz of Super Clarifier per 5000 gallons of pool water each week.
What chemicals do you need to open pool?
Chemicals Checklist: Everything You Need to Open Your Pool A good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels. Chlorine granules or tablets. Shock treatment. Increaser/decreaser chemicals for alkalinity, calcium, and pH. Algaecide. Stain treatment.
How often should I shock my above ground pool?
It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.
Can I fill my above ground pool overnight?
If necessary, clean the pool so that you will have clean water right from the start. When you are ready to begin adding water, make sure you start with a low pressure source such as a garden hose. It is never recommended to leave your home during this time or to fill your pool overnight.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.
How do you treat swimming pool water?
Ways to maintain pool water quality may include: checking pH and chlorine levels daily. checking the pH and chlorine twice daily in very hot weather. monitoring chlorine levels in heated pools which need more chlorine than non-heated pools. brushing and vacuuming your pool on a regular basis.
How many tablets of chlorine do I put in my pool?
To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you’d still use four, three-inch chlorine tablets.
Do I need chemicals for my Intex pool?
While Intex pools aren’t the same as permanent swimming pools, they still require similar chemical maintenance. This is why adding chemicals to your Intex swimming pool is so important. That said, the process itself is fairly simple. You’ll need a pool water test kit (or strips) and a couple of startup chemicals.
What if I have too much chlorine in my pool?
Having too much chlorine in your pool water can be dangerous. Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. High chlorine levels decrease the pH of your pool’s water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion.
Should I use a floating chlorine dispenser?
We do not recommend using floating chlorine dispensers in inground liner pools. They are great until they get caught in the step or skimmer area or sink to the floor of the pool, laying chlorine right onto the vinyl. Below, you can see the chlorine damage to a vinyl liner caused by a floating chlorine dispenser.
