Table of Contents
Can I install an above ground pool myself?
If your space is level or can be made level with just a little excavating, you can easily put the pool up yourself. Otherwise, you will probably need a professional. Purchase one of our kits. We sell above ground pool kits for customers to install themselves.
How do you prepare the ground for an above ground pool?
How to Prep Ground for an Above-Ground Pool Choose the best area of your yard to set up your pool. Mark the perimeter of the pool area. Remove all sod and other vegetation from the area. Determine the lowest point of the pool area. Create a wood level.
What do you put under an above ground pool?
The most common materials to use as a base for above ground pools include concrete pads, commercial pads, sand, solid foam, carpet padding, and flooring underlayment.
Do you need to put sand under an above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
How do I start my above ground pool for the first time?
Step 1 – Clear off the water, debris and anything else from the pool cover. Step 2 – Remove the pool cover. Step 3 – Pull the winter plugs and accessories out. Step 4 – Top up the water in your pool. Step 5 – Reinstall the pool ladder. Step 6 – Prepare the pool filtration system. Step 7 – Power your filtration system up.
How long does above ground pool installation take?
It generally takes between a week and 10 days to build an in-ground fiberglass swimming pool. Above-ground pools can be installed in a day or two but, for a permanent structure, there will need to be a deck around the pool as well as pool fencing.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
Where should I put my above ground pool?
Above ground pools go best directly behind the house and close to it for convenience. Near a kitchen window for a birds eye view. Not under power lines, or near septic system.
Should you put a tarp under an above ground pool?
At the bare minimum, yes you should put a tarp underneath your Intex pool. Inflatable pools, Bestway and Summer Ways pools will also benefit from a tarp. Although a tarp will help protect your pool there are far better choices such as foam tiles or proper commercial under pool pads.
Are above ground swimming pools worth it?
An above-ground pool is, by far, the least-expensive option for a pool. Kids love them, and built-in fencing and locking gate options make them safe as long as an adult monitors them. The main disadvantage of an above-ground pool is that it generally adds no value to your home.
What is the best padding to put under an above ground pool?
Gorilla Pads are pre-cut floor pads designed to protect and cushion the bottom of above ground pools. Unlike old pool foam padding, which can be easily be cut or pierced by grass, roots, or rocks under your above ground pool liner, Gorilla Bottom pool floor padding is impervious to almost any sharp object.
How long before you can swim in a new above ground pool?
You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How deep do you have to dig for an above ground pool?
Step 4: Start Digging Use larger shovels to remove much of the dirt if necessary and smaller shovels for more detailed work. Measure the depth of the hole you’ve created. The hole should be about two inches deep for best pool placement.
How do you level a yard for a pool?
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
What chemicals do you put in a pool for the first time?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
How do you start a pool for beginners?
How to Open a Pool Step 1: Clean up debris and check for wear and tear. Step 2: Inventory your pool chemicals. Step 3: Remove the Cover. Step 4: Inspect the Pool. Step 5: Fill Pool to Middle of Waterline Tile and Do Final Debris Removal. Step 6: Turn on the Pool Filter and Test the Water.
