Table of Contents
Drywall installation costs $1,850, with a typical range of $996 and $2,891. This translates into a price of $1.50 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
How do I estimate drywall installation?
Measure the total square footage of the areas where the drywall will be installed. Multiply the width times the height of each wall or ceiling area, then add all of the quantities together to get a total square-foot amount.
How much does it cost to hang and finish drywall?
People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
How much does it cost to install 1000 square feet of drywall?
The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
How much does it cost to drywall a 20×20 room?
Average cost to drywall a room Room Drywall square feet Average cost 12×20 Master bedroom 510 – 750 $750 – $2,600 16×20 Living room 580 – 900 $850 – $3,100 20×20 Garage 730 – 1,130 $1,000 – $3,900 1,000 SF Basement 1,000 – 2,000 $1,500 – $7,000.
How much drywall can man hang in 8 hours?
If it’s just stacking full boards (like large commercial space) one after the other you could easily hang 40 a day. There are times where I have a room with maybe 12 and not one is uncut, that can take a full day itself, so it all depends.
How much does it cost to drywall a 2000 square foot house?
Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot. Average Cost to Drywall a House by House Size Cost to Drywall a 1000 sq ft House Total Cost Average x 6325 $12,100 High x 7250 $17,325 Cost to Drywall a 2000 sq ft House.
How much drywall do I need for a 12×12 room?
You can both estimate the total square feet of drywall, also known as gypsum board, you’ll need and the number of sheets.How to Estimate Drywall or Sheetrock. Sheet Size Square Feet 4×8 32 4×9 36 4×10 40 4×12 48.
How much does it cost to drywall 500 square feet?
It costs approximately $875 to $1,100 to hang sheetrock in a 500 square foot room. This cost includes labor and materials, but it does not include the cost of removing old drywall or disposing of debris. If you need to remove any old drywall, plan to pay approximately $225 to $250 more.6 days ago.
How much does it cost to drywall a room yourself?
On average, it will cost between $200 and $300 to drywall a 12-foot-by-12-foot room if you DIY.
How long does it take to drywall a 2000 sq ft house?
If you have a home on the small side, say 1,000 to 2,000 square feet, you might expect an experienced crew to finish the work in less than a week. However, even a very experienced crew will take on the long end of the above estimate for larger homes.
How much does it cost to drywall a 10×10 room?
The cost to install drywall is about $2 per square foot. After material and labor are added in, the cost per panel ranges from $60 to $90.Drywall Cost Per Square Foot. Item Price Per Square Foot Basic Labor $0.50 – $0.75 Finishes/Texturing $0.50 – $1.50 Total $1.50 – $3.
Is there a difference between sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How much do drywall finishers cost?
The cost of finishing drywall is typically in the range of $1.00 to $1.65 per square foot, not including labor. For an average 12′ x 12′ room (144 square feet), those costs would translate into a drywall finishing cost of anywhere from $144 to $238.
What does Level 5 drywall mean?
Level 5 drywall has a high-quality skim coat over it. This thin coat covers the nails, tape, compound, and wall materials from the naked eye, creating a pleasing, completed look.
How long does it take from drywall to finished house?
Depending on your home all this can take as little as 2–3 weeks up to 2–3 months to finish. If you have a really small crew working, a really big house or a contractor who doesn’t show up everyday then it could take longer than 3 months.
How much is a 4×8 sheet of sheetrock?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
How many screws should go in a sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
How many 4×8 sheets do I need?
Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
Why is drywall so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.
