Table of Contents
Measure the width of the entire space the curtain will fit over. This typically is the front section of the shower or bathtub. Measure in inches, then choose a rod that fits the opening. Keep in mind that standard shower curtains are 70 or 72 inches wide.
What is a standard size shower curtain rod?
Since the standard shower curtain height is between 70 and 72 inches, the standard shower curtain rod height is around 75 and 77 inches.
How do I choose a shower curtain rod?
If you would like more room in the shower, consider a rod that curves outward. A shower above a claw foot tub calls for a circular rod while a corner shower requires one that is L-shaped. Measure the area to be sure you buy a rod that is the correct size.
Are all shower curtain rods the same size?
Standard shower curtain rods come in 41 in, 60 in, and 72 in. If the rod is adjustable, it will vary from these sizes. Curved rods will also vary because of the curve in the middle. Measure the distance between the two walls to which the rod will be attached, to find the size of rod that you need.
How do you measure a shower tension rod?
Installing a Tension Rod Start by measuring between the two walls with the tape measure. Start by opening or extending the rod by turning each of the ends in the opposite direction. To measure the height for installation, take your shower curtain and hold it against one of the walls above the apron of the tub.
What size shower curtain do I need for a curved rod?
A standard shower curtain (70″ x 70″) will work for a curved or straight curtain rod. If you want a little more slack in the fabric, you can get an extra wide curtain.
What is better a straight or curved shower rod?
A curved shower rod will allow you to enjoy up to 33% more room than using a straight rod. This is because of the outward bulging design that makes it curve in more space from the bathroom into the shower area. You can always enjoy free movements inside the shower without worrying about staining the linen with foam.
Can you use a curtain rod as a shower curtain rod?
Some aluminum curtain rods are strong enough to support some clothes, but their main use is to hang a single shower curtain. The rod should not be placed inside the closet without brackets, as the brackets will add strength and support weight.
How do you measure a curved shower rod?
Measure from either the wall of the tub or the floor, just as long as the mark on both walls is at the same height. Extend the measuring tape from the wall at the front of the tub or shower enclosure to the wall at the other end — lengthwise — of the shower enclosure. Mark down the measurement on a piece of paper.
What height should a shower curtain rod be?
Shower Curtain Rod Height A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.
Why use a double shower curtain rod?
Because the double rod separates the curtain and liner, there is more space between the two, so drying is more efficient, reducing mold and mildew.” From a design point of view, the double rods can also help brighten things up by allowing you to leave the decorative curtain open while bathing to bring in more light.
Can you use a curved shower rod in a small bathroom?
Curved shower curtain rods will expand your bathroom space even in small bathroom spaces and don’t take up too much more room.
Why does my shower rod keep falling?
If the walls on either side of the shower are drywall, you may not be able to tighten the tension rod enough without cracking the walls. Closet pole holders will keep the rod from falling. Each one needs only a single screw sunk into a plastic wall anc hor. Not very subtle but would work if it’s going into drywall.
How high do I install a curved shower curtain rod?
The standard shower curtain is 72 inches (183 cm) long, and when it is linked to shower hooks, it usually gains another two inches (five cm). To prevent the curtain from dragging on the floor of the tub, hang the curved shower rod at a height of 74 inches or more.
Should shower curtain be higher than shower head?
The rule of thumb is to put the shower curtain rod three to five inches higher than the shower curtain’s length. At the least, you want the curtain to hang at least six inches past the rim of the tub.
Should a shower curtain touch the floor?
No, your shower curtain is not supposed to touch the floor. The simple reason for this is it will help prevent the bottom of the curtain from collecting too much moisture and dirt. Therefore, leave at least two inches of space between the curtain hem and the bathroom floor.
Should You Leave shower curtain open or closed?
A shower curtain should be closed when not in use. Once you leave it open, mold and mildew can develop inside the folds. This is because an open shower curtain folds on itself which makes causes the water to get trapped between the plastic and makes it hard to dry. This can eventually cause mold to grow.
