Table of Contents
Your main shut off valve is located just before the gas meter. This is called your “street side valve”. On the inside of your house, where the pipe enters your house, you can find your “house side valve.” This ball valve is attached to a black iron pipe.
Where is the gas shut off in a house?
The gas meter and gas service shutoff valve is usually located on the side or in front of the building. If the building has a breezeway, it could be located there.
What does a gas main shut off valve look like?
This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.
How do I shut off my gas line?
Gas shut-off Locate your main gas service shutoff valve. With a wrench, turn the lever in either direction until it is crosswise to the pipe. Once the gas is turned off, leave it off. Call PSE at 1-888-225-5773 and we will turn it back on, check the system and relight your appliances.
Where is the gas shut off valve for gas fireplace?
Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.
What tool is needed to shut off a main gas valve?
Take a 12-inch or larger adjustable wrench, and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe. (See Diagram B) TIP: Keep a 12-inch or larger adjustable wrench with your emergency supplies, or next to your valve.
Do I need a shut off valve for gas fireplace?
As adopted and amended by 248 CMR, NFPA 54, National Fuel and Gas Code, outlines specific requirements for natural gas appliances such as outdoor fireplaces and grills. One such requirement is the need for an accessible, approved manual shutoff valve approved by the AHJ prior to installation.
How do you tell if a valve is open or closed?
Ball valves are perhaps the easiest valve to see if they are open or closed. If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed.
Is it safe to turn off gas valve?
In an emergency, your gas can be turned off at the main gas service shutoff valve. Do not shut off the gas unless you smell gas, hear gas escaping, see a broken gas line or suspect a gas leak.
How do I turn off pilot light on gas fireplace?
Protect Your Fireplace Turning off your pilot light is a simple process that will save you both energy and money. All you have to do is open the front of your fireplace, turn the Pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well.
Why wont my gas fireplace shut off?
Step 2: Turn off the power switch if your gas fireplace won’t turn off. If there is no switch, it could be on the wall near your fireplace or elsewhere in the room. If there is no switch, you will need to turn the power to the fireplace off in the breaker box.
Do gas fireplaces turn off automatically?
Nearly every new gas fireplace comes equipped with safety features such as a 100% fail-safe shut-off valve. If the pilot flame goes out, the gas flow will automatically turn off. This device automatically shuts the gas off if the temperature in the fireplace gets too cold or if too much carbon monoxide builds up.
Which way do you turn a valve to shut it off?
When it comes to which way you should turn the valve, keep in mind the old saying “righty tighty, lefty loosey.” In other words, turning a valve clockwise, or to the right, will restrict the flow of water while turning it counterclockwise, or to the left, will allow water to flow.
How do shut off valves work?
Shut off valves function with a second type of actuation which is the normally closed version. This valve is held in the closed position by a piston or by two pistons for the larger shut off valves. Once again, air pressure is applied but in this case the valve opens when air pressure is applied.
Where is the pilot light on a gas fireplace?
The pilot light is generally located behind a panel that you can remove or at the bottom of your fireplace. Turn on the supply line to the gas fireplace. If you have an electronic setting which controls the temperature of the unit, make sure the electric switch is on.
Should I turn off the pilot light on my gas fireplace in the summer?
Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
How long does it take for a gas fireplace to turn off?
It takes a fireplace blower about 10-20 minutes to complete the process of it turning on and off.
How do I turn off my heat and Glo gas fireplace?
Remember to shut the gas supply valve off (picture #1). If it remains lit, press the valve knob in slightly and rotate counter-clockwise until the word “ON” is in the 6 o’clock position. Finally, turn the unit’s ON/OFF switch (or wall switch or remote control) to the “ON” position to start your fire.
