Table of Contents
Consideration #1: The scale of your house–The most typical dimensions of quarter round are ¾” x ¾” while the most common size of shoe molding is ½” x ¾”.
Are there different sizes of quarter round?
The quarter round comes in a variety of sizes, which makes it versatile enough for a wide range of applications, as well as an ideal solution for eliminating the gap between trim and moldings and to fill corners.
Do they make thick quarter round?
Cherry Wood 0.75″ Thick 0.75″ Wide 96″ Length Quarter Round Create a subtle blend between wall base and hardwood flooring with this quarter round or install alone to provide a seamless transition between hardwood flooring and any vertical surface.
What is smaller than a quarter round?
Shoe molding, also spelled “moulding,” is smaller and thinner than quarter round, and can have a decorative profile. Quarter round is, literally, a quarter circle. The thin profile of shoe molding allows it to bend into place easily, where the stout quarter round does a better job covering large gaps.
Does shoe molding come in different sizes?
Standard shoe molding, available at home improvement centers and lumberyards, comes in widths of 7/16-inch to ½-inch and ranges from ¾-inch to 1-inch in height. It’s also made in a variety of material options to match the different types of baseboard.
Should you paint or stain quarter round?
If you are laying quarter round or shoe molding on hardwood floors, you should lay a quarter round or shoe molding that matches the floor wood grain & stain. If you are laying quarter round on a ceramic, vinyl, or stone tile floor, you should paint the quarter round to match the baseboard molding.
What is the biggest size quarter round?
The largest 1/4 round is 1.5″ radius for a router. Any larger is too large a diameter. 1.75 would be 1.75 x 2 plus the diameter of the bearing which would be minimum . 5″ which would put you art 4″ diameter.
What is the difference between shoe molding and quarter round?
Shoe molding is much the same as quarter round, having the same 90° angle on the backside but instead of being a perfect quarter radius, its profile is a bit more squat. Using shoe molding gives the floor installer more latitude in their end cuts and also allows the trim carpenter to hide un-level floors.
How much gap does quarter round?
Quarter Round: A quarter round molding is one of the most common types of molding you’ll come across. It’s typically ¾” inches by ¾” inches and is used to cover the expansion gap between the floor and a wall, baseboard, or toe kick.
How do I figure out how much quarter round I need?
determine the perimeter of your room: add the length and width measurements together and multiply by two. Measure the width of each archway and doorway, and add together. subtract the total of the doorway widths from the room perimeter to determine the total required length of wall trim and quarter round molding.
Should I caulk quarter round?
To Install Quarter Round Use Nails Not Caulk Installing quarter round on baseboards with caulk is not a good idea because it can be difficult to remove should you need to repair the floor in the future.
What is quarter round used for?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
What nails do I use for quarter round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.
Do you have to use quarter round with laminate flooring?
No you never need to use quarterround. I try to do all installs without using it.
Can you use quarter round on ceiling?
It’s routinely used to run along the wall at the floor, ceiling or other long span where it can fit snugly into the inside corner while facing the curved side out. Like crown molding, it can be complicated to hang on the ceiling, because you need to adjust the cuts to be upside down and backward on your miter saw.
How do you match quarter round to baseboard?
In my humble opinion, standard sized matching quarter round looks too bulky against any baseboard, especially common colonial or clam shell type base that only sits 3 ½ inches off the floor. Some Examples to Compare Oak quarter round Painted quarter round Oak shoe molding Painted shoe molding.
Do you paint shoe molding before installing?
Many experts say that it’s wise to paint the trim before you install it. It’s a fast and easy process that can dramatically speed up paint time. People who paint trim before installing tend to place the boards on sawhorses over a drop cloth to work.
