Table of Contents
What Is a Pine Tongue-and-Groove Ceiling. A tongue-and-groove pine ceiling consists of long pine boards that fit side-to-side (tongue into the groove) across a ceiling. Often, the pine boards are long enough to span the entire width of a room without using any seams.
Is tongue and groove ceiling expensive?
How much does a tongue and groove ceiling cost? Tongue and groove typically costs between $1.25 — $1.60 per linear foot, or around $2.50 to $3.00 per square foot.
Are tongue and groove ceilings popular?
Using tongue and groove joints for ceilings are becoming an increasingly popular phenomenon for porch ceilings and interiors alike! The natural wood elements of tongue and groove ceilings provide a classically warm, authentic ceiling design, and it can also provide a great cover up for an ugly ceiling.4 days ago.
Which is tongue and groove?
A tongue and groove joint is a type of woodworking joint that simplifies the installation process of wood boards and materials. Its main purpose is to easily fit groove boards and joints together with minimal stress or effort involved.
What is the difference in shiplap and tongue and groove?
Shiplap panels overlap, while tongue and groove panels interlock. Wood often shrinks in dry climates, and shrinkage is less likely to show with shiplap because it overlaps instead of interlocks. Tongue and groove panels may be a better option for very cold climates because they insulate slightly better than shiplap.
What kind of wood is used for tongue and groove ceiling?
A tongue-and-groove pine ceiling consists of long pine boards that fit side-to-side (tongue into the groove) across a ceiling. Often, the pine boards are long enough to span the entire width of a room without using any seams.
Can you install tongue and groove without drywall?
Ceiling planks today lock together with tongue-and-groove milling, just like floorboards, but they’re significantly different than typical flooring. If the ceiling has bare joists, it’s a much easier project; in fact, it might make sense to remove old wall board or plaster before installing a wood ceiling.
Are plank ceilings expensive?
Material cost: From $1 to $2.50 per square foot. These tongue-and-groove wood planks have a smooth surface and a nice linear quality, which can help elongate a room.
Is a wood ceiling more expensive than drywall?
But you may not be surprised to learn that installing a wood ceiling is more expensive than using drywall. All in, it would have cost about $1,450 to drywall the ceiling in my attic. That’s roughly the amount I ended up paying for just the tongue-and-groove boards alone, prior to their installation.
Why is it called tongue and groove?
Like shiplap, each timber panel has a tongue (the thinner, protruding ridge) on one edge, and a groove (the slot) along the opposing side. Once fitted together, they form a V — hence the name.
What is tongue and groove in construction?
‘Tongue and Groove’ refers to a method of constructing a joint between two pieces of wood. The groove is a slot cut into one side of the board and the tongue is a ridge cut into the other side. The tongue fits into the groove, creating an interlocking joint between the boards.
When did tongue and groove begin?
The first tongue-and-groove flooring, allowing planks to be fitted tightly together, was invented in 1885 thanks to a machine called the side-matcher. At the end of the 19th century, the end-matcher was invented, before which time flooring was simply nailed to joists.
What type of wood is used for ceilings?
Oak is the most popular quarter-sliced wood used for ceilings. Other woods available in this style are white birch, white oak, sycamore, black walnut, white maple, bamboo, vertical-grain hemlock, cherry and vertical-grain Douglas fir.
Do you nail through the tongue or groove?
For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail — drive it slightly below the surface of the wood — to prevent interference in the joint.
What kind of nails do you use for tongue and groove?
The two most common types of nails used for tongue and groove paneling projects are the brad nail or the finish nail. Brad nails are made of 18-gauge steel wire and because they are very thin nails, it makes them perfect for use with delicate material such as pine wood.
Is shiplap cheaper than tongue and groove?
Shiplap is cheaper than tongue and groove, but it requires a bit more work on the carpenter to get the rows to lay flat against the building in a waterproof fashion. However, a correctly installed exterior of shiplap siding has a finished appearance that appeals to many homeowners.
Which is better tongue and groove or overlap?
Tongue & Groove is superior to Overlap, and products showcasing tongue & groove styling (Such as floors or wall builds), generally demand a higher price.
Is tongue and groove waterproof?
Precision manufacturing techniques, which ensures of a watertight fit between panels, contribute to the enduring appeal of tongue and groove systems, particularly for areas which need to be waterproofed. Instead, you have a fabulous uninterrupted and completely waterproof stretch of the most impressive wall surface.
How much does tongue and groove ceiling cost?
So, we know the tongue and groove ceiling looks awesome, but the big question is it affordable? According to the material you choose it can run anywhere from $2.00-$3.50 per square foot.
How do you seal a tongue and groove ceiling?
Tongue & Groove Ceiling Finish Ideas Linseed Oil. If you are seeking a natural look for your tongue and groove ceiling, the easiest solution is a simple treatment with linseed oil. Stain. Stain should be used with caution on ceilings. Paint. Some homeowners choose to paint their tongue and groove ceiling.
How thick is tongue and groove?
3/4″ Pack Size Pack Size 1 Board Length Board Length 8′ Actual Thickness Actual Thickness 3/4″ Actual Width Actual Width 7-1/4″ Species Species Pine.
