Table of Contents
Faucet Measurements Spout reach is measured from the center of the spout base horizontally out to the water stream. Spout height is measured from the sink/countertop surface vertically up to the highest point. Refer to the specification sheet for your faucet for specific measurements.
How do I measure for a replacement kitchen faucet?
If you have windows or cabinets above your sink, measure upward from the center mounting hole to find the maximum overall height and ensure your new faucet can fit comfortably underneath. To find the ideal spout reach, measure from the center mounting hole forward to the center of your sink.
How do I know what size faucet I need?
Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.
How do I know what size kitchen faucet I need?
First, you need to address size as it relates to functionality. Second, to look balanced, your faucet should be in proportion to the sink. A large faucet would visually overpower a small prep sink, while a small faucet might look odd in a large sink and countertop area.
Are kitchen faucets standard size?
Are All Kitchen Faucets the Same Standard Size? Since there are many different types of kitchen faucets, there is no standard or typical hole size. The faucet hole size will vary depending on the kitchen faucet you plan to install. Measure the faucet hole size before you shop.
What does 8 inch spread faucet mean?
On an 8″ spread there will be 8″ from the center of the hot faucet to the center of the cold faucet. Like this: A 4″ or mini spread will be quite close together and make it difficult to clean around the handles and spout.
How do you measure a kitchen faucet spout?
Spout reach is measured from the center of the spout base horizontally out to the water stream. Spout height is measured from the sink/countertop surface vertically up to the highest point.
Can any kitchen faucet fit my sink?
Start With the Sink’s Faucet Holes There are many different kitchen faucet and sink designs available, but they’re not always compatible. If you’re installing a single-handle faucet into a sink with three holes, the deck plate will usually cover up the unused openings.
What is a 4 inch spread faucet?
The 4” or center set faucet has the faucet’s handles and the spouts combined through a deck plate. But in some designs, the handles and spouts are not joined in a single plate. These are the mini spread 4 inch faucets. The 4” is the measure of the distance between its handles.
What is standard faucet spacing?
WIDESPREAD. Widespread faucets are designed for three-hole installation and feature three separate pieces: two handles and a spout. The standard distance between the handles is at least 8 inches, making them slightly larger than other types of bathroom faucets.
What is the most common kitchen faucet size?
After researching, I wrote this article to share my findings with you. What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification.
Are all kitchen faucet holes the same size?
While not all faucets are the same, the standard sink faucet hole size is 1 3/8 inches. For some, a 1 1/2-inch hole may be required. If the faucet is a three or four-hole faucet, you’ll need holes 6 or 8 inches across your kitchen sink. Widespread faucet hole spaces can be as wide as 16 inches.
How far should faucet hole be from sink?
The distance between the faucet body (where the water enters the faucet) and the areator is usually 8 to 10 inches for a kitchen faucet. However some oversized faucets have a reach of 11 to 16 inch.
What is 4-inch faucet hole spacing?
A 4-inch faucet will fit sinks with outer holes that measure 4-inches apart. An 8-inch faucet will fit sinks with outer holes that measure 8-inches apart.
Will a widespread faucet fit?
Unfortunately, the majority of widespread faucets will not fit in that space. A happy alternative would be to use a mini widespread faucet. These are widespread faucets that are designed to fit in the same space as a centerset faucet. They come in 4-inch, 6-inch, and 8-inch options.
What is a mini spread faucet?
You often see a widespread faucet on a granite or marble countertop. It’s the type of faucet that, when viewed from above, doesn’t appear to have anything connecting the handles and the spout. A mini widespread faucet is the version for bathroom counters. Its handles are separated by 4 inches.
What is the standard spout reach for a kitchen faucet?
The standard reach for many sink faucets is an average measurement of 5.5 inches deep. It can go up to 8 inches.
How do I know what size my faucet aerator is?
With the help of a nickel and dime, you can easily determine the size of your aerator. First remove the insert and washer from the inside of the aerator. Set a nickel on top of the aerator, and if it’s almost the same circumference, the aerator is a regular size. If it’s not a regular size aerator, use a dime.
What size is a faucet hole?
Hole size = 1 3/8″or 35mm is the worldwide standard faucet hole size.
