Table of Contents
Soffit lighting fixtures are installed into soffits, roofs, eaves, and porch overhangs to provide down lighting in a specific space. This type of lighting is also used within the interior of a home to accent specific design elements or decor.
Where should soffit lights be placed?
Place the recessed light fixtures in areas around your home that need additional illumination, such as between windows or near the corners of your home’s exterior.
Are soffit lights worth it?
LED soffit lights are quite common not only because of their aesthetic quality but also of their efficiency. Compared to other light bulbs, LED soffit lights allow you to save energy up to 90 percent, making it beneficial both to the environment and to your pocket.
Can you put lights in soffit?
If you are installing multiple soffit lights around your home, you may want to control them all using a single switch or dimmers. This is why LEDs become an advantage to use for soffit lighting since they consume lower power and gives better performance for multiple fixtures.
How much does it cost to install soffit lights?
Outdoor soffit lighting installation costs $75 to $250 per light.
What size are soffit lights?
Types of Soffit Lights Size: While 4-inch pot lights are the most common size for 12-V models and 6-inch soffit lights are typically paired with 120-V systems, outdoor recessed lighting 3” and 5” diameter options. Features: Decide on what features are important to you.
What are the lights that light under the overhang of a house?
Soffit lights are recessed and do the opposite; they pool light on the ground and draw the eye down. Soffit down lights leave the soffit and fascia of the home dark except for the bright, intrusive light of the soffit light itself.
What lights to use in soffit?
A good recessed LED lighting fixture should be UL Listed and rated for use in damp or wet environments like your outdoor soffits. As long as the fixture is covered by roof above, which is exactly what the soffit does, then your good to go.
What is a soffit on a house?
The soffit is the material beneath the eave that connects the far edge of your roof to the exterior wall of your house. They are often vented. Besides being underneath your eaves, soffits can also be on the underside of a porch roof.
What kind of downlight do I need for soffit?
Ansell IP44 rated outdoor downlights are the ideal choice for external use in soffit and fascias. They are specifically designed to meet the demands of the outdoors and coated in a special Dupont paint which is guaranteed for 20 years.
How do you run power to soffit?
instead of running the NB cable outside, drill a hole into the soffit where you want to install the outlet. From the outside push all your cable into the hole except for 12″. Then from in the attic hook on to the cable with a long pole/hook and pull the cable toward you.
Are canned lights out of style?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
How much do electricians charge to install recessed lighting?
The cost for an electrician to install recessed can or canless LED lights will generally be between $200 and $250 per fixture. Professionals charge at a rate of $85 to $105 per hour and each installation takes approximately 2 to 2.5 hours.
What is the difference between can lights and recessed lights?
Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
How many lumens should soffit lights be?
Light Level 2 ranges from 140 to 180 lumens. This lumen output range is ideal for lighting subjects 10 to 20 feet high—like the soffit of a two-story home or the tops of trees. Understandably, the taller a subject is, the more light you will need to illuminate it.
What is uplighting and downlighting?
Uplighting refers to lights that are mounted to shine their light upward and are installed at low or ground level. Downlighting refers to lights that shine their light downward; so they would be installed at a higher to point to create this downward light effect.
What is an eave light?
NO EAVE. The Eave Lite is a recessed downlight, ideal for installation in eaves, soffits, entrance ways, verandahs, carports or covered decks. It can also be used in bathrooms, kitchens or where moisture transfer or decibel rating is a minimum requirement.
Do I need soffit?
A roof may need soffit vents if there is no other ventilation allowing for adequate air movement. However, if the attic space is properly sealed and insulated, there is no need for this type of ventilation. Soffit vents are an easy, aesthetically pleasing way to vent the attic space.
What is soffit installation?
Soffit is used to enclose the underside of an eave. The installation of soffit will determine the positioning of the inside and outside corner posts. It also is necessary to complete the soffit before the final course of siding is installed on the wall.
Does a house need soffits?
Soffits have an important job on the outside of a house. They protect the underside of the eaves from moisture and rot. Moisture can cause big problems, not only to the eaves, but also to the attic. Finally, soffits help keep unwanted intruders like insects, pests and birds out of the attic, too.
Can I use downlights outside?
Downlights are ideal for under lighting on porches or patios, providing a well lit and social area. Available in a number of finishes to suit your taste. Graphite Grey is a top seller, lending itself to outdoor use.
What IP rating Do soffit lights need to be?
As the soffit is outside then it is IP44 minimum.
Are IP65 downlights suitable for soffits?
Suitable for use soffits, porches, PVC and uPVC fascias, the H2 Pro Extreme is IP65 rated. It offers complete protection against water and dust from the front and also from the back.
