Table of Contents
How do I set the temperature on my Braeburn thermostat?
How to program a Braeburn thermostat? Press the “Prog” button. In order to select “Cool” or “Heat”, press the “System” button until it lands on the desired setting. Use the arrow buttons to adjust the time and temperature you need for each time slot. Click “Return” when you’re done.
What is hold on Braeburn thermostat?
The “hold” function basically lets you override the pre-set temperature and thermostat setting if your schedule changes. For instance, if you have a day off in the middle of a workweek and are at home, you can press the “hold” button to lock the current temperature in while you are in the house.
How do you set a Braeburn 2020 thermostat?
Press and hold the RETURN button for a few seconds. The screen will change and your temperature differential setting will appear in the display. Use the UP or DOWN arrow button to adjust this setting to your desired value. Wait a few moments and the screen will return to normal.
How do I override my Braeburn thermostat?
You can temporarily override the program at any time by pressing either the UP or DOWN arrow button for about 2 seconds until the display flashes once. At that time you can use the UP or DOWN buttons freely to change the desired set point temperature. the display will return to normal mode after a few seconds.
Why is heat blinking on my Braeburn thermostat?
Most newer Braeburn thermostat models will flash the word HEAT or COOL when the thermostat is calling for your heating or cooling system to run. When the call for heating or cooling is over, the word HEAT or COOL will become solid.
Should my AC be on run or hold?
This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
Should I use the hold button on my thermostat?
The hold button on the thermostat allows you to key in the desired temperature, different from your normal programming. It will maintain this new setting until you resume your regular schedule. You can manually change the thermostat back to its normal programming whenever you get back home.
Where is the reset button on a Braeburn thermostat?
To reset your Braeburn thermostat, locate the RESET button on the front or side of the unit. It is usually located inside a small hole. So, it may require you to get a paperclip, or a pin to press the button. Now long-press the RESET button for about 4 to 5 seconds to reset the thermostat.
Why does my Braeburn thermostat reset 85?
Here are a few reasons why your thermostat may keep resetting to 85 degrees: You have the thermostat programmed to 85 degrees. The batteries need replacement. The thermostat has a blown fuse.
How do I set my Braeburn thermostat 5000?
Put the thermostat into the OFF mode. Remove the batteries (if equipped) and press the reset button located on the front of the thermostat. Replace the batteries and move the system switch to the HEAT or COOL position and try running your heating or cooling system again.
Does my Braeburn thermostat need batteries?
Some Braeburn thermostats require 2 “AA” alkaline batteries while many newer models can be battery operated, directly wired (hardwired) or both. Check your user manual for specific instructions.
How do you override thermostat settings?
Press and hold the temperature adjustment button. Doing this will allow you to override the current temperature for the duration of the current time period of the programming. Then you can adjust the temperature as you see fit.
Is Braeburn a good thermostat?
This thermostat works fine electrically and is very easy to set. It is a good basic digital thermostat for those who don’t wish to deal with programming a more complex unit.
What does it mean when heat is flashing on thermostat?
“Cool On” or “Heat On” is Blinking If this set of words or the illustration is blinking, your thermostat is in a five-minute delay state. This feature stops your equipment from damaging short cycling. This could occur if you lose power.
What does it mean when cool is flashing on thermostat?
When your thermostat display says “Cool On,” this is an operation mode that’s controlled by your thermostat. When you see this cooling message, it essentially means your AC unit is working to pump cool air into your home. On some occasions, this “Cool On” message may flash for only a short time.
Why is my heating thermostat flashing?
If your the screen on your thermostat is blinking, it may just mean that the battery is low, and this is simply your unit’s way of telling you to replace its batteries before it dies entirely. If this is the case, unscrew the thermostat from your wall and replace its batteries.
Where is the reset button on a thermostat?
Arrow Buttons – Normally, a thermostat has two arrow buttons for resetting the temperature higher or lower. If you adjust these, the new setting is temporary, only lasting until you have reached the end of the previously set program.
Why does my thermostat go higher than setting?
Another problem that can cause your house to be hotter than what you’ve set the thermostat to is if your home’s HVAC system isn’t sized properly. An HVAC system that’s too large for your house will cool your home unevenly. It will only cool some rooms off and then shut off versus cooling down the entire house.
