Table of Contents
Night Stay will arm your exterior doors and windows and some of your motion sensors. You may want your downstairs motion to be armed and your upstairs motion to be disarmed when you are sleeping at night.
What is the difference between armed stay and armed night stay ADT?
Arm Night is exactly the same as Arm Stay. The only difference is that any Interior Zones with the Arm Night setting enabled will not be bypassed when the system is set to Arm Night mode. Please note that you will only see the Arm Night option if you have at least one sensor with the Arm Night option enabled.
What does Armed stay ADT mean?
STAY is used to arm the system with people or pets inside the premises. The perimeter sensors will be armed, however interior sensors will be left unarmed. AWAY is used when no one will remain inside the premises. The entire system (interior and perimeter) will be armed and interior movement will trigger an alarm.
How do I arm my ADT alarm at night?
To set this alarm at night: Shut and lock all of the doors in your home. Close and lock all windows. Go to your ADT alarm. Key in your security code. Press “Instant” (which also doubles as the number “7” key.) Wait for the alarm to beep three times and the “Armed” LED light to turn red.
What is the difference between stay and night on alarm system?
Stay vs. Night. Briefly, the stay setting is to be used during the daytime, while you’re staying in your home. The night setting, while also to be used when you’re in the home, is to be used at night time when your movement is more limited.
Does disarmed mean the alarm is off?
Disarmed: When Disarmed, no sensors in your home will be monitored and no alerts will be sent to the monitoring station although the system will still be powered on and functioning. Use Disarm when you’re at home and want the freedom to go in and out of your house easily.
How do I know if my ADT alarm is armed?
When you arm your system using the Away arming method, both interior zones (e.g., motion detectors) and border zones (e.g., door and window contacts) will be active and will cause an alarm to sound when opened. 1. Check that your system is ready to be armed (Ready light is ON).
Why does Armed Stay say exit now?
When arming in stay mode, the alarm system should still provide an exit delay, or say “exit now.” This is to provide someone the opportunity to leave the property while arming the system for the remaining individuals. Jul 25, 2012.
What does sleep mean on alarm?
Sleep Mode is a system mode that ignores all proactive and real-time tests, parameters, and quiets all alarm notifications, effectively putting the Flo System to sleep. Sleep Mode should only be used when the home is experiencing or will experience irregular water usage which may trigger an undesired alarm.
Should you set your house alarm at night?
As well as when you are leaving the house (even if it’s for a couple of minutes), we also highly recommend for people to use the night setting every night. Just as you are going around, checking if all windows and doors are locked each night, add switching your burglar alarm to your routine.
Does ADT alert the police?
ADT will call the police if there is an emergency that activates the alarm. ADT will attempt to call the homeowners first. If the homeowners cannot be reached, a phone call will be made to the local police dispatch. If you plan on using ADT as a home monitoring service, this is useful information to have.
What is ADT force bypass?
The bypass feature on your ADT alarm system allows you to choose devices that will not be active when the alarm system is active. For example, if you were to bypass a window sensor, the window could be opened when the system is armed and you’re away, without causing the alarm to activate.
What is blue by ADT night mode?
Use this mode when no one’s home, entry and exit delays are on, and motion sensors are on. NIGHT:Press the Nightbutton and then enter your User Code to arm in Night Mode. Use this mode when you’re in for the night, entry and exit delays are off, and motion sensors are off.
What does disarmed mean on alarm system?
Disarm: Disarming a system means turning the system off. This does not mean removing power to the system but it does mean that the system is not actively protecting the home against break-ins or other emergencies.
What is disarmed mode?
Disarmed Mode: Disarmed Mode turns the Ring devices that you include in it off all at once. By default, this means that all of the Ring cameras inside your home will be unable to detect motion, record video, or provide access to the Live View.
How do I turn off my ADT alarm?
After logging into the Pulse app, you’ll see a large red or green icon on your dashboard. To arm your system, tap the green icon. Choose if you’d like to arm your system stay or away. To disarm your system, tap the red icon.
What happens when ADT alarm goes off?
The short answer is that when the ADT alarm goes off, the ADT monitoring station immediately contacts the home or business owner at 1-2 phone numbers and then notifies the authorities if they don’t get an answer with the correct password on the account.
What does 12 mean on ADT?
12. # KEY: Permits ARMING of the system without use of a security code (“Quick Arm”, if programmed).
